York 025-29148-004 HighSideOilTransducer

HighSideOilTransducer

The "York" HighSideOilTransducer allows you to see where your oil level is at. It uses the latest Technology and lets you see where your oil level is. It is lightweight and fits easy into your motor home without having to worry about drilling any holes into your motor home.

Open your door to the world of pressure testing with the new HighSideOilTransducer from York. This transducer features a new look and technology that allows you to accurately measure down to 5 PSI, and includes a cast stainless steel housing. This oil transducer is compatible with any of York's chemical resistant, polypropylene tanks and 100% waterproof - a glance at the optional meter display makes it easy to monitor each test. Welcome to the York family.

The bulkhead mountable HighSideOilTransducer features pressure ranges from 100-900kPa, 0.1Pascal resolution, and outputs 4 to 20mA DC current signal. The transducer includes a 24" coiled cable. This bulkhead mountable YSI pressure sensor features a Brinell hardness rating of 316 to 316H.

The York HighSide Oil Transducer with pump is great for moving large quantities of fluids into or out of storage tanks. A highly visible 6-LED display shows flow rate, while the manual mode regulates pump speed. The unit meets NEMA Type 4 requirements and is suitable for use in liquids of not more than 250° F maximum temperature.

The High-Side Oil Transducer is a non-contact device that detects fluid levels in sealed tanks or vessels that are not easy to access. The transducer is placed on the outside of the tank or vessel, and reports fluid level through a 6 ft cable.

_The York Compact Digital High-Side_ Oil-Transducer, installed with a thermowell and pneumatic pressure switch allows for better detection of the water level and the oil level in a heating tank. The external sensor head can be mounted on a vertical or horizontal conduit pipe.

The HighSide™ is an advanced optical sensor that measures the height of the oil in the pipelines. It is designed with advanced self-diagnostic, auto ranging and auto zero capabilities.

Our high-sensitivity oil transducers measure magnetic flux density and amplitude as a function of frequency for reciprocating air compressor or gas compressor. These devices are available in single or dual axis versions. Each type has a unique design which assures vibration free measurement.

This product is an ultrasonic, piezo-electric oil transducer with a maximum operating range of 20 inches. It is designed for use in the dynamic measurement of heavy oils and/or solids in vertical tanks. The electronics are housed in a thermoplastic casing with integrated mounting flange. The transmitter consists of an ultrasonic detector mounted on the transducer carrier, feeding into a microprocessor that filters, amplifies and outputs the data as an analog signal onto coaxial cable via an RFBalanced opto-isolated output type.

This type of instrument can be used, for example, to measure the level of oil in tanks and reservoirs. The protective IP 67 and IP 69K housing is designed and constructed according to the requirements of MIL-DTL-83528 and IEC standard 60529. The sensor module is made of stainless steel AISI 316 with sealing by means of a double O-ring on the housing.

A high accuracy, high precision pump oil level sensor for fuel tanks. It can be used to detect the fuel level in aboveground or underground storage tanks, or to monitor oil in engines that use an external pump for fuel delivery.

The York 025-29148-004 works with York products to monitor and control compressor suction pressure as well as displaying oil level as a percentage on a single digital display.