York 025-34159-000 3000Ohm Temp Sensor

3000Ohm Temp Sensor

The York 025-34159-000 is a High Pressure Cut Out Switch with a 3000Ohm thermal sensor. Meets ASME/ANSI Standard B31.3 definition of limit switch.

The York 025-34159-000 3000 Ohm Temp Sensor is an impulse isolated NTC Thermostat for use with refrigeration equipment and cooling appliances, such as coolers, freezers and air coolers. The high/low pressure cut-out switch acts as a safety device to cut out the power supply from the compressors in event of high or low discharge pressure.

Our 025-34159-000 3000Ohm Temp Sensor is designed for Boiler, Furnace, Hot water heating and high voltage applications.

York® spas are assembled with only high quality components. This includes the 025-34159-000 3000Ohm temperature sensor, which is a critical component that tells the system when it's time to shut off.

A high-pressure cut out switch is an important device that is required when installing a hot water tank. It isolates the water in the hot water tank from the plumbing lines, protecting the appliances that use your hot water supply and preventing scalding.

The York 025-34159-000 switch is a 3/4 in. x 1/2 in. high pressure cutout used to shut off water flow to the heating element when the desired water temperature is achieved. This 025-34159 switch has two terminals and a set screw terminal and is used with high pressure gas valves only.

This unit is used for monitoring temperature in a pressurized tank.

It can be found on paper products, refrigeration equipment and air conditioning systems. When your equipment reaches its normal working temperature, the senor automatically shuts the unit off and keeps it off until the temperature drops.

This is a Direct replacement for the following:0240-0052York

It can provide a variety of abnormal state indications and control commands through the HART communication protocol. Each module is designed to meet the specific needs of process control.