YORK
York 025-35787-008 SPST 20' FIX RESET SENSOR
SPST 20' FIX RESET SENSORThe SPST 20' FIX RESET SENSOR is a mechanical control device for use in air-side HVAC applications where the energy source is located in one area and the thermal load is...
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New AccountLTC SENSOR SPST 35/45F
The LTC SENSOR SPST 35/45F wireless, liquid level control is designed for use with the York YMC series of supplying pumps. It will shut down operation of the pump when liquid levels in the tank rise to the preset level. The bottom actuator floats on the liquid surface allowing precise liquid level control. The sensor has its own power supply that is plugged into the pump, and relays information back to the pump controls via a two-way wiring harness.
The LTC35/45F Single Pole Top Limit Switch is a safety device used to protect people from contact with moving parts. The sensor is used in applications where a physical trip point would be beneficial, such as a bump stop or level limit.
Check out our Line of Automatic Pool Cleaners including The LTC Sensor 35/45, the Dolphin Enterprise Plus, or the Dolphin Premier. Our Line has something for everyone! Get in touch with us anytime you have any questions at all!
The LTC-SENSOR-1 is a 1 channel discharge sensor for use with LTC control stations. Each channel monitors a discharge load and provides an impulse to the control station when the invoked duration has been completed. Invoked durations can be from 10 minutes, 15 minutes or 30 minutes.
This product is an LTC sensor manufactured by YORK. The human body temperature (Ta) is measured by this sensor.
The LTC-SENSOR is a unique liquid level control. The liquid sensor used in this liquid level controller can be of any liquid type of density. The liquid flow can either be on/off solenoid valve, on/off air operated valve, or on/off DC operated valve. These flow valves are used on the liquid that is to be elevated or lowered based on the level of the liquid .
This adjustable, temperature-compensated linear taper controller (LTC) is designed for advanced temperature control applications in water heating, air conditioning, and refrigeration. It features an adjustable output (output can be adjusted by varying voltage) and provides approximately 0.5C temperature rise per degree F of output adjustment. Reverse current flow sensing circuits are mounted in the controller to protect against voltage surges during start up. LTCs are available in single-pole (SPST) and three-pole (SP3T) versions.