York S1-025-26392-003 SPST Rollout Switch SPST Rollout Switch

SPST Rollout Switch

The York SPST Rollout Switch control permits easy positioning of a fixture from a concealed mounting box. The unit is designed with a normally closed non-drafting press snap switch, which opens when released. The durable rotary knob switch can be locked to prevent misalignments.

The S1-025-26392-003 SPST Rollout Switch is designed for automation and control of devices that require the control of a single point. This switch allows for device activation through direct visible access, normally open activation procedure, visible access with momentary activation procedure, visible access with on/off activation procedure, concealed surface mounted access or concealed moments access.

The York® S1-025-26392-003 new style SPST "Rollout" switch is designed to stop power to motorized equipment in cases of emergency. The new style features a standard electrical plunger switch attached to a ball-bearing mounted shaft, which retracts when the Seismic Pushbutton is depressed, preventing accidental equipment start-up. The pushbutton can be used with or without gloves. The switch uses 22 gage, 3 conductor shielded cable with spade lugs for easy field wiring. It is equipped with an integral LED indicator light.

This SPDT snap-action switch is a single pole, double throw micro-switch wired straight. It has a 2.125" (5.4 cm) standard mounting hole pattern and the screw tab on the switch lever is 0.58" x 0.20" (1.5 x 0.5 cm). Useful for many low voltage applications, it offers a long life, durable contacts and an easy to operate hand lever that can be used with either hand. A must have proof of concept for new inventors.

The YORK S1-025-26392-003 is a replacement for the following switch.  The replacement for 1NO+1NC SPST SPST Pairs of Terminal Leads. 1NO+1NC Release On Push 1NO+1NC Push to Trip 1NO+1NC Push to Lock 1NO+1NC Up Right Momentary Contact 1NO+1NC Down Right Momentary Contact

The YORK S1-025-26392 slide switch, part number 1002027396, is a single pole double throw (SPDT) rocker switch containing two separate SPST switches. It has an On/Off and On/On position and is commonly used in applications where it is desirable to be able to turn on and off more than one circuit with a single lever (2 circuits).

The S1-025-26392-003 is a single pole single throw (SPST) Metal Oxide film switch has double break with pushbutton center detent. It features the high quality heavy duty double break with pushbutton center detent. This SPDT cantilever switch is for use in harsh environments, where dust, oil and water are common. The switch operates on 120 Vac / 15 A resistive loads. It also features wide handle angle range. The large handle diameter provides positive tactile feedback, extended operating life and maximum durability. It has a rugged construction for excellent service life in extreme environments.