York 027-03517-000 MTR TEFC 50HP 208-230/460-3

MTR TEFC 50HP 208-230/460-3

York 027-03517-000 MTR TEFC 50HP 208-230/460-3

York's 027-03517-000 MTR TEFC 50HP 208-230/460-3 is an industrial-grade electric convection motor that provides lasting performance and value to commercial and industrial applications. This TEFC (totally enclosed fan cooled) motor is ideal for use in high temperature applications when airflow must be kept well circulated to maintain efficiency.

Motor Size: 1/8 Horsepower: 50 Hp. Frame Size: TEFC 208-230/460-3 Voltage: 460-3 Phase: 3

York has a large selection of quality, energy efficient motors to fit a variety of air handling and heating applications. Look for the MTR TEFC Motor on the following York equipment: Belt Drive, Combo Centrifugal/Reciprocating, Floor Mount, Horizontal fan airflow, Horsepower 0.37 HP to 46HP , Horizontal Blower

This MTR Square Drive motor is specifically designed for air conditioning and refrigeration with dry, hermetically sealed ball bearings, canted fan blade to accommodate belt or chain drives, TEFC enclosure with internal venting for AC applications that require internal ventilation, measuring 13-1/8" x 11-5/16" x 15-3/8".

Flat belt drive concept provides clean, quiet operation. Electric-field maintenance-free ball bearings. Totally enclosed fan cooled (TEFC) housing for maximum operational reliability. NEMA electrical enclosures are suitable for installation in nonhazardous locations where subject to moderate physical damage and chemical corrosion. These units are designed for either indoor or outdoor installations, totally enclosed fan cooled (TEFC) with parallel capacitor banks; TEFC motors are totally enclosed with non-draining blind shaft.

This motor is of the totally enclosed fan cooled (TEFC) type, has an aluminum frame with cast iron end shields and a cast iron coupling. The modular design simplifies maintenance and increases both the availability and the life of components such as the motor frame, endshields, and cooling system

Our YOR92 is a 50hp 208V-460V Class A/B vertical motor with speed from 0.5Ø to 1750rpm & provides 460V 3 phase.

Efficient single-phase motor with an open drip proof design. Ideally sized for air cooled screw chiller applications.

Each York I/A Series air-cooled Industrial and Commercial Fans has been designed, tested and proven for years of commercial use in larger applications. These dependable, single-phase fans provide cooling for process rooms larger than 800 square feet. These fans are equipped with an independent direct current (DC) motor starter as standard equipment. The I/A series features a thermostatically controlled motor that automatically maintains a constant degree of airflow throughout the fan's operating range, making it suitable for a wide variety of heating, ventilating and air-conditioning environments.

Our heavy-duty, non-exploding/non-microbiologically contaminate air process compressors enable positive displacement gas conditioning; i.e., liquid is converted into gaseous state without liquid phase change.

This is a used item. This item has been tested and it is in working condition. The seller has stated that this item is in good cosmetic condition, but may show signs of light wear on its exterior.