York 7900-7741/A 4 Ton Blower Assembly

4 Ton Blower Assembly

The York 7900-7741/A 4 Ton Blower Assembly is 7 ft. 1 in. tall, 31 in. long and 40 in. wide and has a shipping weight of 240 pounds. It is made up of the blower assembly and the wheels only with P/N 3516093, axle, swivel caster and seal kit P/N 9278342, rubber wheel P/N 3795672, (2) rear caster wheel spacer P/N 1539328, (2) bearing support bracket P/N 2613507, 28-inch wheels 6150806. The

Bring power to your cleaning needs with the York 7900-7741/A 4 Ton Blower Assembly. Designed for residential and commercial applications, this 4 ton blower is great for DIY jobs like painting or moving leaves. Add it to a variety of outdoor tools for powerful system capabilities.

Whether you're moving leaves, blowing concrete, or prepping for a landscaping project, this 4 ton blower has you covered. This blower assembly features a 112cc gas-powered engine that offers up to 1030 CFM of air flow and 561 RPM of air velocity. It also comes with all necessary hardware for installation.

The York YDA2-4E duct booster fan is designed to supplement forced air heating and cooling systems. The fan moves air from a central air register into a return air duct. Purposely built without overload protection, this duct booster fan can run at low speeds for long periods of time. The YDA2-4E 4 ton blower assembly has a maximum airflow capacity of 3020 cubic feet per minute, with an operating CFM of 975.

The York 7900 Series manual blower is designed for use with 9200, 9400, and the 9450 & 9470 series heat pumps. The blower has a standard performance of 4 tons, 60 hz., 3.7750-92636-2R, 208/230v 1 phase 1725/1875 RPM, 35.8 Amps @ 208v / 41.4 Amps @ 230v

The York 7900 Blower provides the most consistent performance for the Con Edison, Consolidated Edison, Steam Heat, and Steam Boiler industries. Four-ton blowers are used in larger buildings such as schools, apartments, shopping centers, or hospitals. Some of the features are: Cast Iron Casing with Enamel Coating to Resist Corrosion and Protect Against Industrial Environment; Cast Iron Basket Cooling System; Air Scoop Switching To Suck In Warm Air From Outside Unit; Stronger Interlock Connector Between Blower And Motor; Large 4-1/8" Blower Wheel Equipped With

The new York blower assembly is designed for use on York and Aire-Flo portable air conditioners.