York S1-024-25910-700 24V DPST Relay 24V DPST Relay

24V DPST Relay

This 24V DPST Relay, from York International, is designed for residential and light commercial applications. It has a bronze body to meet UL/CSA requirements and has a built-in thermal overload protection to prevent overheating. This device is easy to wire, connects one load to two switches and can be used with a contact rating capacity of 5 amps at 24 volts AC/DC.

The S1-024-25910-700 24V DPST Relay is a 24V DC relay rated for 6.2A at 125VAC  It has two normally closed (NO) contacts that will close when the signal is applied and open when the signal is removed.

This 24V DPST relay is used to control home or industrial equipment; it has 3 closed contacts that are normally-open (N/O) via the coil, and three other closed contacts (N/C) to which power can be applied. The other two contacts are connected together internally. It is made of electrically conductive plastic, and must be used in conjunction with an appropriate power supply; do not exceed rated load.

The York S1-024-25910-700 24V DPST Relay is a replacement for any 24VDC two position, two speed switching application. This easy to wire 2 SPDT relay offers current capacity of 0.5A. This product has a maximum voltage of 24VDC and a minimum voltage of GND.

The 24V DPST (double-pole, single-throw) relay has 3 terminals, 2 controlling the "common" contact, and one switching the load on/off. When the coil is energized by applying a voltage between its terminals, the electrical circuit of the relay is completed through contacts 1 and 3, causing power to flow to the load (or useful effect). The operating portion of this switch does neither use nor consume power.

The 24V DC solid state relay provides 3 changeover outputs that are normally open (NO) at turn on, but are re-settable to be normally closed (NC). It includes a 2-relay diecast aluminum housing with flame retardant PC, 0.5" terminal posts, 0.5" screws, and plastic insulator support. The diecast aluminum housing is UL 94V-0 flame retardant ABS. The 24 VDC SPDT relay's contact resistance is less than 1 milliohm at 250 VAC input voltage.

The general purpose DPST relay offers a compact size and a variety of operation modes to control load devices, such as air conditioners, blowers, pumps, fluorescent lights and other inductive loads.