York S1-024-36138-000 24V 60HZ DPST NO RELAY

24V 60HZ DPST NO RELAY

The York S1-024-36138-000 24V 60HZ DPST NO RELAY is a micro relay that has a relay switching capacity of 100 mA at 110/220 vac. The DPST relay voltage can operate in voltage range of DC 40 V ~ DC 115 V, 42 V ~ DC 90 V, 42 V ~ DC 90 V. The switch function are normally open (NO), normally closed (NC). The 24V DPST NO RELAY is suitable for hotel door lock control system.

York S1-024-36138-000 24V 60HZ DPST NO RELAY

The 24V 60HZ DPDT NO-RELAY is designed to replace a lost or broken, existing solenoid in York gas pack heaters. Replacing the existing solenoid will restore heating capabilities to the heater.

The York S1-024-36138-000 is a 24 VAC SPDT NO/NC DPST switch with 1 electrical connection. This 2P4C swtich is used for general purpose control circuits.

This traditional design DPDT relay is an N.O. (normally open) 12V DC or 24V AC/DC SPDT (single pole, double throw) relay with 3 terminals, an "on-off" toggle lever, and a sliding contact for SPST (single pole, single throw) switching contact applications.

The YORK® S1? Series three phase Standard DC single pole transfer switch is a latching type, short-time delay/voltage sensitivity transfer switch designed specifically for the 24VDC power distribution system. The unit is housed in an aluminum enclosure with no contact cooling required, and has an operating temperature range of -22 to 122 degree fahrenheit.

York SPDT Normally Open Momentary Rocker Switch with Insulated Lever, 120/240 Volt AC, 1/2hp, 0.30 Amps, 48 Watts.

Series S1 SPDT snap action switches are designed for use in general purpose applications such as lighting, controls and other switching requirements. Available in 10A (S1-024-24) and 60A (S1-024-36) configurations, these DPDT snap action switches use long lasting silver contacts and feature a rocker spanner rocker arm.

The DIVINOL York Series 1NO-1NC open collector control contactors are designed for use in typical industrial, commercial and service installations wherever variable speed operation is required. They are particularly useful where frequent starting and stopping of high horsepower motors requires high performance contacts.

The S1 Series Toggle Switch Housing with 2-Position and 3-Position Cams is ideal for installations requiring up to two switches in a single device box…

York Control Products

The York® / ECG® S1000 Series® panel is the perfect choice for all of your power distribution needs. Designed with 36 configurable circuit breakers on top, with 80A per circuit breaker, this customizable unit allows you to split your circuits with no hassle.