York S1-024-36022-000 RELAY W/ BREAKER

RELAY 24V

This product is the Relay 24V with Breaker. It is used to break off communication to an element. You can use this relay to connect an unfired heating element to a 220v circuit so that the element will heat up.

The RELAY, offers space-saving design with an integrated wall box. Installed within the standard wall box, it provides reliable fail-safe protection for motors and generators at a very competitive price. No special configuration is required because the RELAY is designed to fit flush against the wall. The compact size, multiple mounting options, high short circuit breaking capacity - up to 60A makes the relay suitable for use anywhere in facilities that utilize portable equipment requiring motor control, including environments with limited space.

For use in a variety of industrial and commercial applications, the York S1-024-36022-000 relay with breaker is a general purpose mechanical switch with a normally closed contact. Use this device in any application that requires a normally closed switch. The sealable contacts on this 24 VDC general purpose relay are ideal for equipment manufactured in heavy duty environments.

The S1-024 is a combined relay and contactor, easy to install by plugging into 208/240V 20Amp circuit. It is designed to switch 208/240V loads of up to 15 Amps, 240V loads of up to 30 Amps (1400 Watts), or 115/120V loads of up to 60 Amps (3600 Watts). This unit has one set of normally closed contacts, and can be used with any external manual or automatic reset type of circuit breaker. The relay's 10' long power cord has a NEMA 5-15P (125V) style plug

The YORK® Freedom™ line is engineered to provide your home with the most energy efficient and quietest performance possible. This powerful unit runs on a 24 volt motor and pushes 1,000 CFM's of air for maximum comfort and efficiency. Featuring a fully insulated cabinet, the Freedom™ line allows you to choose between a 115 volt or 24 volt heater coil. The Freedom™ line provides positive pressure ventilation for applications where fresh air exchange is desired.

This relay can be used to disconnect one circuit and connect another such as an emergency heater. This product is cULus listed, 577 certified and has a contact rating of 1A at 120VAC, 15VDC. It is intended to be used in a standard type box and can handle up to 600 volts between contacts.

This 4-Inch Cylinder Breaker has a maximum current is 22A, Nominal voltage is 24VAC, and features bifurcated mounting tabs. The breaker is designed for general use, and the mechanical shoe is recommended for the ENC series of contactors. This product has a pitch of 1/2 inch and is ANSI rated.