York S1-025-41250-000 121 DEG C FUSIBLE LINK

121 DEG C FUSIBLE LINK

York S1-025-41250-000 121 DEG C FUSIBLE LINK

The 121 Deg. C Fusible Link is for use with the BTH and YHK smoke detectors.

The 121 Deg.C Fusible Link is intended to act as a safety device for Motor Regenerative Braking (MRB) applications, which will reduce the icing of the stator windings caused by the difference in potential between the Stator and Rotor (Rotor Stator) due to motoring operation.

The 121 Deg C fusible link is designed to stop the flow of current in the event of an overload or short circuit. It is generally mounted in series with the other electrical fuses in an electrical panel. Thelink should be removed by qualified personnel only.

The kinked jaw design and all steel construction of the 121-Degree C Fusible Link makes it ideal for installation in those difficult locations where access is impossible. This fusible link is for use with 1/4-Inch, 3/8-Inch and 1/2-Inch valves and includes a 1/8-Inch NPT female pipe thread connection.

This 121 degree C fusible link is suitable for use with most electrical machinery. It has a wire size of 4-6mm² and a wire length of 25mm with a maximum ampacity of 18A at 250VAC.

This 121 Deg C fusible line meets the standard of EN60335-1. As part of the York fusible link range, these are suitable for use in domestic combination type boilers. 2 terminals