York S1-025-46848-000 PRESSURE SWITCH HIGH

PRESSURE SWITCH HIGH

Looking to increase the efficiency of your residential boiler? The York S1-025-46848-000 PRESSURE SWITCH HIGH boiler pressure switch from York Control Products is a direct replacement for a BR924 pressure switch. It can be installed quickly and easily. This 1/2" NPT high temperature cartridge style valve offers cut-in pressure at 25 PSI and cutout pressure at 35 PSI. The under-dash mounting bracket offers a place to attach a manual reset breaker that can automatically be reset if needed.

The Pressure Switch High is specially calibrated for hot water applications above 90 degrees Fahrenheit. It works by cycling a pump on and off to maintain a constant water pressure, and is compatible with all York 10 gallon, 20 gallon, and 30 gallon high-temperature electric tankless water heaters.

The York S1-025-46848-000 Pressure Switch High is a replacement part that controls the gas supply to the furnace when it reaches a certain pressure. This Pressure Switch can be used in production burners in high temp water heaters, specific mixers in cement mixers, and in many other gas pressure applications

The YS-5 pressure switch is equipped with an adjustable reset feature for flow control of all York compressors. A 3/8 inch male pipe thread allows for quick connection to the compressor inlet line. The adjustment dial is located on the switch, making it conveniently accessible.

If you're looking for a pressure switch, then look no further than the first choice of many professionals worldwide. It is no coincidence that York is first on the scene. This small but high quality company was founded in 1945 to focus on the manufacture of industrial steam equipment for mounting on generators and engines. The success of this concept led to an offering of many products for industrial use.

Our high pressure switch is a replacement for most major pool pumps and is an ideal replacement for the Hayward® Pressure switch. It has stainless steel hardware and a 20 amp rating.

A pressure switch that can be used in a centralized system or as a stand-alone unit. This pressure switch is factory set to turn on when the set point of 30 PSI is reached. It can also be adjusted for other desired pressure settings.

The York YS1 Pressure Switches are designed specifically to replace the pressure switches in various air conditioning systems. The pressure switches are used to turn the air conditioning unit off once the desired cool temperature is achieved.

High pressure switch for temperature regulation without circulation

The high pressure switch consists of a bronze body with a steel float, set point adjustment screw and an o-ring (EPDM) seal. The bronze body and steel float ensures that this product is highly corrosion resistant. It is suitable for gas and water applications.

Pressure Switches sense changes in pressure and can be used to control loads such as solenoids, valves, electric actuators or pumps. Other pressure switches may also be used as limit controls or as switches that provide two levels of output along with third auxiliary contacts. A residual pressure switch opens when the differential between the input and output pressure is below a certain level. For example, a residual pressure valve might open when there isn't enough air pressure left in a supply line to maintain a constant flow rate to a downstream regulator.

The S1 Series RELAYS are used to limit the maximum operating pressure to a specific value. Specifications: Max. Operating Pressure: 300 PSIG (20 BAR) Solution Temperature: 150°F (65°C) Phase: 3-ph, 120 VAC (108-132 Hz), 115 VAC (50/60 Hz)