York S1-026-34726-001 110-140F AUTO Limit Switch 110-140F AUTO Limit Switch

110-140F AUTO Limit Switch

The S1-026-34726-001 110-140F AUTO Limit Switch protects staff in non-hazardous areas in industries including food processing, textiles, paper milling, hospital, or in science lab settings. It boasts a polycarbonate enclosure that will withstand years of handling in environments where dust, splashes, chemicals are expected.

The York S1-026-34726-001 110-140F AUTO Limit Switch.

York's Limit Switches are designed for use in hazardous locations, with their high quality design and durability. These switches are manufactured in accordance with NEMA/IEC STANDARD, CAT3 Div 2 requirements. The 110-140F AUTO Limit Switch is an SPDT on-off limit switch that has six terminal pins to be connected to the load.

The York S1-026/34726-001 is a 110-140F AUTO limit switch with 2 1/4 to 4 wire leads and 1-1/2" NPT thread.

The YORK-S1-026-34726-001 Limit Switch is a 110-140F AUTO, 1/2", NPT, BSPP Switch.

The 110-140F Auto Limit Switch is designed to be used on the Sunmaster York S-Series hand pieces. The limit switch fits directly on the back of the tip during the milling procedure. This may be required on large cavities or deep areas of preparation.

The HONEYWELL-YORK S1-026-34726-001 is a 110-140 F Auto Limit switch. This item is used to protect equipment from damage due to overheating. It features red and black wires, 0.4 inch mounting hole centers, 0.14 inch terminal holes, High quality contacts provide superior electrical performance for repeated actuation, 23 Amp @ 480 Vac maximum voltage limitation, 30 Amp @ 250 Vac rated current limitation, Olive Drab Steel Enclosure with embossing on front panel visible above limit adjustment screw (1A), Black Plastic End Caps.