York S1-1TVMBB2 "5/8"" R410 TXV KIT"

"5/8"" R410 TXV KIT"

York S1-1TVMBB2 "5/8"" R410 TXV KIT"

The YORK S1-1TVMBB2 5/8" R410 TXV KIT is a replacement condenser coil for an existing YORK system. kW: 0.5-5.0, Quantity: 2 per system.

Superheat TXV kits are used to compensate for heat loss in the sealed loop gas heating system. The York S1-1TVMBB2 5/8"" R410 TXV Kit is made to cause positive pressure on the indoor coil, which ensures proper airflow. It is important that your air conditioner be installed by a licensed technician.

The R410 TXV KIT allows for an economical way to achieve tight temperature control with less power consumption using the YAL series. The R410 TXV KIT contains the 5/8"" (1.60 cm) Low Ambient (TA) Water-Cooled Split System Condenser, all the required field connection hardware, and a 10 year warranty on all components.

The York S1-1TVMBB2 5/8" R410 TXV Kit is for use with the following air handling units:

With the 5/8" 1-Ton R410 TXV kit, you can upgrade your York multi-stage heat pump to provide ultimate comfort. This kit can be used in applications up to 46,000 BTUs and 48,000 BTUs using other York products, sold separately. It features an auto-adjusting line-voltage damper motor for added expansion valve safety, high efficiency motor for increased airflow at lower voltages, and a non-restrictive filter design to protect the pump against clogging.

This kit has an evaporator coil. Contact your local York dealer for auxiliary heat system requirements. Condensing Unit, Direct Expansion, 17 Seer, Single Stage Gas/Electric Heat Pump with R410A Refrigerant - 5 Tons , 230 Volt, 60 Hz, 60 Amp. Unitary Products with High Velocity Outdoor Coil

Bring your system up to code - Energy Star Qualified, this package brings your new York system up to Energy Star Code. A great choice for the person that just needs this item.

The York S1 Air Handler is a packaged product that requires very little installation. The compact size and efficient design makes this unit a favorite for small commercial applications. The S1 will include a filter drier and filter, installation instructions and supports to assist in the transit of this product. With a 1/9 hp motor and a 60,000 BTU cooling capacity per hour this unit packs a powerful punch.

Each room needs a York-built packaged heat pump to deliver the comfort and convenience of cooling and heating in one energy efficient unit. All York packaged heat pumps are unconditionally warranted for 10 Years on the heat exchanger, compressor, lubrication system, and brine-to-water heat transfer system.

The York S1-1TVMBB2 comfort zone heating and cooling systems are designed to make sure everyone enjoys their home, no matter the season with features like Comfort-Stat technology, consistent temperature settings, and a durable construction with 2-year extended warranty.