Zurn QQMBS3 Bend Support for 1/2" PEX Tubing, Metal, 1 piece

METAL BEND SUPP 1 2

A bend support is a plumbing fitting that is attached to the end of a length of PEX tubing. PEX tubing systems, also known as cross-linked polyethylene (PEX) tubing, allow for fast and easy installation of plumbing systems without soldering or brazing. Bend supports are designed to help protect the tubing from damage by keeping it in place during installation and can be used for both cold-water lines and hot-water lines.

Do you need a support for 1/2 inch PEX tubing? The Zurn QQMBS3 is a Metal Bend Support for 1/2 inch PEX tubing. Complete your project with this quality product. This may be the best choice to complete your project.

The QQMBS3 from Ferguson is a 1/2" PEX Bend Support for use with 1/2" PEX tubing. Features include: - Metal design. - Easy installation. - Flow rated at 60gpm. Product Type: PEX Bend Supports, Material(s): Metal, Color: Black.

Zurn's QQMBS model is a Metal Bend Support for 1/2" PEX Tubing. This product is used as support for 1/2" PEX tubing and bends made in the tubing. The most common use of this product would be to add support for a "S"-curve in 1/2" PEX tubing, or as a substitute for U-bend on your system.

This part is made of metal.

The QQMBS3 is manufactured from a galvanized steel and is used to support 1/2" PEX tubing in off-center applications.

The Zurn QQMBS3 is a bend support for 1/2" PEX tubing. It is used to provide support in bending applications and prevent the tubing from collapsing. This product is made of metal and comes as a single piece.

Caring for your home can be difficult and confusing, but our professionals are here to help you every step of the way. Zurn offers a wide range of products, from bath and kitchen faucets to water heaters, that will keep your home running smoothly for years.

The Zurn QQMBS3  is one of the best that is currently available in the market. The Zurn QQMBS3  has a height of 4.5" and comes with a pack size of 1. This product has a bend support for 1/2" PEX tubing, metal, 1 piece, which does not require skilled labor for assembly. It has a maximum pressure rating of 150 PSI at 180 degrees F and is made from galvanized steel with zinc plated finish to resist corrosion.

Ferguson's QQMBS3 is an economical metal bend support for use with 1/2" PEX tubing. It provides a secure attachment point without the need to fasten it directly to the fitting or pipe. This bend support incorporates a screw-style clamp to provide a custom fit, yet can be removed with just one wrench for easy and quick installation and removal.