THERMISTOR-INDOOR AMBIENT
The THERMISTOR-INDOOR AMBIENT is a thermistor and its characteristics are as follows: * Resistance Temperature Coefficient: -0.038% / O C per 200 Celsius degree change * Size: Roughly 20mm in diameter, 4-3/8 inch with leads, 11/16 inch thick * Termination: Ring terminal to be crimped to wire and shrink tube for overmolding.
The Thermistor Indoor Ambient sensor, part number AM0961P00073, is used in Amana brand Gas and Electric dryers to monitor the ambient temperature inside the dryer.
AMANA model #0130P00073, manufactured in 2006 by Amana, the thermistor-indoor ambient stopped responding.
ORIGINAL EQUIPMENT COMPONENTS ** OEM PART NUMBER: 0130P00073/292616; PRODUCT RANGE: 01300 SERIES; APPLIANCE TYPE: RANGE; COMPONENT THERMISTOR, APPLIANCE TERMINAL TEMPERATURE, INDOOR AMBIENT; COMPONENT MOUNTING TYPE, ITEM FOR USE WITH MODEL/MODEL NUMBER LISTED BELOW. PLEASE VERIFY THAT THIS
This part is a thermistor used on indoor air conditioner models to monitor the control board temperature.
The new Thermistor is a replacement for the faulty Temperature Limiting Device used by many window air conditioning units
This device consists of a sensing element, normally a metal oxide semiconductor (frequently nichrome or other metal oxides) thermistor, enclosed within an exothermic resistor. The sensing element has two electrical connections, a negative lead and a positive lead. There is usually also an additional negative lead, but this can be attached to the same point as the sensing element negative (load). The furnace control board should have only one thermostat and no bi-metal heating or cooling elements when