Baldwin 0426056 0426 056 ADJ BALL CATCH

0426 056 ADJ BALL CATCH

The Baldwin 0426056 0426 056 ADJ BALL CATCH's sleek design and custom adjustment capabilities make it the perfect solution to many problems.

The Baldwin 0426056 0426 056 ADJ BALL CATCH is made of Cast brass with zinc plated steel. It was made in China and it weighs approximately 1 lb. The overall length of the product is 3" with a width of 6-1/2" and it has a height of 7-3/4". The ball catch is 0426056. This swivel hook is warrantied by SLS for a period of five years.

The Baldwin 0426056 ADJ Ball Catch features key slots to make installation and/or replacement easy.

The 0426056ADJ is a Ball Catch from the ADJ1 Series. Its maximum flow rate at 300 psi (21 bar) valve opening pressure and a discharge temperature of 60?F (16?C) to 180?F (82?C) is 1.20 gpm (4.5 lpm). Maximum lift for this Cv is 10 ft. The cut in pressure for this valve is 5 psi (0.34 bar), and the cut out pressure is 67 psi (4.3 bar).

The ADJ Ball Catch is a great replacement part for many Baldwin Access control systems, such as 1000S, 2000S, 3800S and 9000S. Just snap it in to your system's receiver and you'll be up and running in no time. It's also compatible with almost all brands of access control systems, so you'll be sure to find the perfect match for your home.

042 Series Ball-Catch™ allows the operator to lock or release two dog assemblies in sequence

The Adjustable Ball Catch is perfect for applications where the kitchen and dining room are separated by an open pass-through. In order to create a seamless transition, Baldwin developed this low-profile solution that is mounted to the wall above the pass-through. The 14" square glass plate is set on centers that allow for adjustment up and down Varies from 6? to 9? from top of mounting surface to bottom of glass plate