Titan TIT23154 Digital Torque Adapter - 1/2in. Drive, Model#

1/2" Drive Digital Torque Adaptor

The TITAN® 1/2" Drive Digital Torque Adaptor is ten times more sensitive than your standard torque adaptor — this means you'll have the power to sense even the tiniest of fasteners. Its triple-beam design is far easier to read than a single beam, which makes calibrating your torque wrench, and using it as intended, easier too. Plus, the LED lights flash green when you meet the set torque value for accuracy.

The TITAN 1/2" Drive Digital Torque Adaptor is a quick release Torque adaptor that allows accurate and repeatable torquing of up to 20Nm.

The Titan 1/2" Drive Digital Torque Adapter has a large, easy-to-read LCD display with a wide range of lb-ft. /N-m torque measurements available in 0.5-lb. / 0.7N-m increments for precision control, and is capable of measuring repeatable values as low as 5 ft.-lbs., with an accuracy of +/-3%+1 count . A tool can be completely disassembled if necessary while the tool is still attached to the adapter, so there is no need to remove it from the machine.

A complete and comprehensive solution for work in the field. Featuring a built-in, digital torque adaptor, this rugged adapter features a 1/2" foot-pounds torque measurement scale for measuring the torque applied to a fastener. Digitally displays product information and diagnostic warnings. - 1/2" Drive - 360° Calibration - ±2% Dynamic Torque Accuracy - Built-in LCD Digital Display with Backlight - 10Hz Low and 0.5 msec Fast Transient Response Circuitry - Heavy Duty Metal Carrying Case

Engineered to always stay on target, this adaptor senses and displays your preferred torque setting, allowing you to simply and safely tighten a bolt to the correct setting. Simply attach the adaptor to your power tool, set it to your desired torque setting with the easy-to-read knob, and go about your business without having to apply manual torque wrench settings. The Titan TIT23154 Digital Torque Adapter - 1/2in. Drive features a forward/backward torque direction switch for optimal use, dual scale torquing range (5-100 ft.-lb./0.69-7.3Nm

Fasten any 1/2 in. drive tool onto this digital torque adapter to determine exactly how much torque to apply in real time. The TITAN Torque Adapter is capable of outputting up to 44 ft-lb of torque, a great measurement for working on automotive or bike parts. The unit has an accuracy of 0.5%, letting you know exactly how much pressure to apply in order to properly secure nuts and bolts.

This digital torque adapter converts a standard 1/2" drive socket into a torque control device. Now more accurate readings can be taken with less chance of error when tightening or loosening fasteners. Features include rugged cast zinc housing, die-cast aluminum end caps to protect internal components, over/under torque detection and an audible alert, and an LCD display to view readings in lbs.-ft. or Nm.