MCDONNELL & MILLER
24V/MILLIVOLT ELECTRIC WATER FEEDERThe 24V/MILLIVOLT ELECTRIC WATER FEEDER is an accessory for use with the MILLER PRO 120, 240 and 507 Stapler Filler. The 24V/MILLIVOLT ELECTRIC WATER FEEDER can...
24V ELECTRIC WATER FEEDER 169500
McDonnell & Miller 24V Electric Water Feeder is a boon for air pressure washers. It is a professional equipment to be used to increase the volume of water flow. The automatic feeder adds water in incremental amounts while you are cleaning, as per your demand.
The Royal Air Force has a variety of airfields across the UK. When aircraft take off and land, they are dependent on a good supply of water at those locations. Aircraft carry different amounts of water which needs to be replenished on a regular basis as they re-fuel prior to onward flights. Bridges and Racecourse Engineering has the solution – the 24v Electric Water Feeder. This is an innovative device, powered by 24v electricity, which can replenish loads of water into aircraft hoses while they are stationary at airfields. The rate of water flow can be adjusted and there’s no need for manual
A water feeder that powers itself with a 24 volt electric drive unit that mounts into your tractor PTO or on your three point hitch. The 24 volt electric water pump delivers up to 9 gallons per minute. Max pressure is 1000 psi and the system comes complete with all required hoses, fittings and connections. Compatible with most low pressure sprinklers or conventional spray systems.
This electric water feeder attaches to a hose line for watering pastures and fields without having to turn on tractor--or use hand lines. The feeder has eight 5-gallon poly tanks, hoses, fittings, pump and steel base.
Our 24V water feeder is the perfect irrigation solution for under 10 acres while delivering reliable delivery and the consistent flow you need to minimize soil compaction. Our durable plastic belt drive pump provides performance, 600 hours between service and protection from arcing, a leak-proof fan cooled enclosure, easy to replace impellers and adjustable float switch for setting run time, all combined to make this unit a must-have tool for any operation.
The Electric Water Feeder (EWF) allows you to easily fill your spray gun with water, without bending or stretching. Ideal for use on a large spraying project, it works with most brands of electric spray guns.
Dasco Keyhole Electric Water Feeder has a sturdy steel frame with a powder coat finish in both inside and out. Inside the feeder is a metal tray for holding feed balls. The float plate has a comfortable trigger with a lift bar to give you more control while watering. The copper tube with brass Gate Valve will not rust. On the outside, there is heavy gauge steel tubing. This feeder also has adjustable legs with caps for better ground contact and tracking adjustment to level on uneven surfaces.