REZNOR 103055 103055 TXFR BE141650-WAA TXFR BE141650-WAA

120V-PRI 24V-SEC 40VA TRANSFOR

With the revolutionary REZNOR TXFR-103055 (i) Converter/Charger, you simply plug in a power strip and the Charging Relay Module activates your charger circuits. Ideal for powering security systems and providing battery backup at remote locations, this important part has a built-in circuit breaker to assure proper operation of the converter/charger.

The REZNOR TXFR series is designed to be the most reliable outdoor-rated power distribution box on the market. This unit has two NEMA 6 208-240 Vac circuits and one NEMA 12 12 Vac circuit for a total of 1020 watts of available power and 20 amps of capacity per circuit. The enclosure is IP66 rated making it suitable for underwater, indoor and outdoor environments. The rubber gasket seals allow the unit to be used in reverse as a submersible power distribution box. This unit comes with (2) 12 gauge power cables terminated with quick disconnects that can be removed from the enclosure without

The Reznor TXFR-141650-WAA and optional TXFRBE141650-WAA continuous gas fired heaters are designed to accept either 120 volts AC primary power or 120/240 volts of alternating current. The TXFR-141650-WAA uses a gas fired condensing unit, an air cooled fan coil., and two igniters. The gas supply inlet connection is located at the terminal end of the heater.

Powerful Power Entry Module Features an On/Off Switch and a Screw Terminal, 15A, 125V

A REZNOR fixed frequency transformer provides the rectification of an AC input to provide a DC output at the required voltage and frequency. Skyworks Solutions, Inc. offers a wide range of power amplifier products in both surface mount and through-hole package configurations. They are used within various electronic systems for signal conversion, power amplification, and signal transmission functions.

Offering the utmost in energy efficiency, REZNOR's TXFR compressor-free refrigeration system is able to provide 40 tons of cooling capacity in its B141850-WAA NEMA 4X enclosure.

Made to run on two separate power supplies: 120 VAC Printer Power Supply (PPS) and 24 VDC Sys-Com Power Supply (PS). If loss of one supply will cause a significant problem to the operation of the equipment, it is determined as a dual supply.