CONBRACO 36215 Apollo Valve 10-400 Series Bronze Safety Relief Valve, ASME Hot Water, 30 psi Set Pressure, 3/4" NPT Male x Female

3/4"M X 3/4"F HOT WATER RELIEF VALV

CONBRACO 36215 Apollo Valve 10-400 Series Bronze Safety Relief Valve, ASME Hot Water, 30 psi Set Pressure, 3/4" NPT Male X Female

CONBRACO 36215 Apollo Valve 10-400 Series Bronze Safety Relief Valve, ASME Hot Water, 30 psi Set Pressure, 3/4" NPT Male x Female

The Apollo series of relief valves is used on hot water applications. This valve is equipped with thermoplastic seat to withstand high temperature and are used to protect against over pressure in systems where the maximum allowable working pressure exceeds the relieving capacity of the piping system.

CONBRACO Apollo Series Lift Station Relief Valves are available in Bronze, Brass and Stainless Steel and are used as safety relief valves on high pressure hot water sanitary pump discharge lines.

The Apollo safety relief valve, Model 36215, is designed for use on high temperature hot water appliances for atmospheric pressures to 10 psi. The unit is furnished with standard bronze disc and internally adjustable seat. The valve is rated for 400 series stainless steel bodies. The set pressure can be varied from 5 to 20 psi in 7 psi increments by installing optional spring seats and manually positioning in-line spacer washers on the set screw, and then tightening the set screw ``

The Apollo safety relief valve is a two position spring biassed, normally closed valve with self resetting combination seating. It is designed to relieve excess pressure from indirect fired hot water and steam boilers. This thermal expansion relief valve can be used on all types of boilers and temperature service tanks. A compact design allows multiple combinations of NPT pipe sizes to comply with ASME B16.34 class 150 and 300 pressure ratings. Three handle designs are available: (1) Standard-handle, (

The Apollo is a safety relief valve for the 10-400 Series of copper hot water boiler and also features stainless steel construction, built for large maintenance free systems requiring flow rates up to 400 GPM. The Apollo is designed to be installed directly in front of the piping valve(s). It should not be installed downstream of the piping valve(s) in the main distribution piping because it will not then be able to detect dissolved gas in the system. The Apollo must be used with an appropriate sensing device