AMANA 162600 -Amana 10728339 150-190F AUTO Limit Switch

150-190F AUTO Limit Switch

Description: 150-190F AUTO Limit switch is a control device of the power adjusting system. It consists of detecting part and control part. The detecting part detects the overheat / over-current of load, and according to the current, it outputs corresponding relay signal. The control part compares current and voltage, cuts off the electric power automatically when the temperature or current exceeds the specified value. It closes the electric circuit in case of abnormal load on the power source, and raises alarm by beeper

The 150-190F AUTO Limit Switch is designed for installation in a zone with PT100 (10MO ± 10%) RTD and diode protection, and for use with inverter systems. It is suitable for switching resistance-based panelboard loads, including lamps, air conditioners, heaters, pumps, blowers, fans, and others.

The AMANA 162600 -Amana 10728339 150-190F AUTO Limit Switch is a limit switch for the CA16 series of gas furnace.

AMA150-190F Auto Set Pressure Switch is equipped with a micro sensor that automatically changes the limit from 150PSI to 190 PSI. It is safe and reliable with its auto reset feature it prevents over heating of your boiler or firebox. The AMA150-190F is easy to install and requires no maintenance.

The 155194P2 is an AMANA-EB series Limit Switch, it’s designed to ensure automatic overheating protection for heating and cooking appliances with solid state controls.

This replacement limit switch is for most Amana, Carrier and Bryant brand furnaces. Compatible models include FW16C, FW12C, FW16B, FW12B, FAU16C-E1, FAU12C-E1, FAU16B-E1 & FAU12B-E1.

The AMANA 15 Series Limit Switch is used to control the ON and OFF operation of the following appliance loads: Electric Heat