GAS APPLICATION TRANSFORMER W/GROUN
GAS APPLICATION TRANSFORMER W/GROUND
ALLANSON 78418 Transformers 1092-SG 120/6000v WebsterPrimGround is used in gas applications to power an outlet and help with the safety of the area. This transformer primary voltage is 120/60. The secondary voltage is 6000 vol 1 uf.
A portable AC/Gas Grounding Transformer is designed as a a suitable for the rare application where more than one ground rod is required, but it is not possible to run a wire between two ground rods. This unit is mounted on a 30" x 48" skid and includes 15' of 4" Chlorinated polyethylene (CPE) pipe and connector. It is conmpletely encapsulated with one housing. The system was tested at 6000VAC and ground rods should be spaced no more than 12' apart.
ALLANSON 78418 Transformers 1092-SG 120/6000v WebsterPrimGround
ALLANSON TRANSFORMER Model 78418 is 120/6000V, 1000KVA, 600/480V, 3 Phase, 5.5KVA with a NEMA Design B Mechanical design
This transformer may be utilized for either 120 volt AC/60 Hz service or 240 volt AC/50 Hz service. It can be applied for 600 volt, 3 phase, Y and delta connections. The unit is enclosed in a die cast aluminum housing to protect against dust, moisture and the deteriorating effects of high temperature environments. A unique lug arrangement allows the transformer to be bolted either horizontally or vertically to a supporting structure. This transformer is available in a variety of voltage taps from 50 volts up to 6000 volts.
This transformer provides single phase, 120/6000 volt output to ground. Enclosed in a rugged, weatherproof steel case to protect against gas and oil leaks, this transformer can be used for outputting high phase loads. It is enclosed in a rugged, weatherproof steel case to protect against gas and oil leaks.