OTC OTC526908-7 Tools & Equipment Variable Pin Spanner Wrench,10 mm (-)

Variable Pin Spanner Wrench,10 mm

The OTC Tools and Equipment Variable Pin Spanner Wrench, 10 mm allows you to work in hard-to-reach locations where you cannot use a wrench or socket to tighten or loosen nuts. The spline on these wrenches varies from 3/32 in (2.38 mm) to 7/32 in (5.6 mm). This open-end spanner wrench also works for odd-shaped nuts and bolts, including square, hex, and 12-point style nuts up to 3/4 in (19 mm) long. Flank angle is 12 degrees.

The OTC Tools and Equipment 10 mm (-) Variable Pin Spanner Wrench is ideal for working on recessed head fasteners, where other wrenches won't work. The wrench has a uniquely designed offset that allows it to use pins and keyways with insufficient access. The rubberized handle provides a secure grip while working. This 10 mm (-) variable pin spanner wrench measures 205 inches long, weighs 4.8 ounces, and has two bits of storage on the handle side.

This handy 10 mm spanner wrench is the ideal multi-purpose tool for many automotive, farm, shop or household applications. The steel pin ratchets to the rear, held in place with a spring-loaded ball detent to hold the pin position during work.

TPIN Wrenches are a revolutionary design that combines the best features of traditional open and ring wrenches. They are designed for general maintenance and repair work on all modern vehicles. The TPIN wrench features a tapered pin that allows it to be inserted in either direction into the nut or bolt regardless of the direction of fastener handedness. The large, flat contact area provides greater torque to resist cam out as well as the easy-to-adjust screw to fine-tune the fit into tight areas.

A pin wrench is a type of wrench that has varied pins. Pin in the wrench is removable and replaceable by pins of different sizes, with each size required for use with a specific size of fastener threads, as a way to allow snug fit over different size fasteners, without sacrificing leverage

This unique tool allows you to apply more pressure to a fastener, resulting in increased torque as pin diameter varies. And because the pin is varied in diameter, you're less likely to slip off the fastener. Pin diameter is 8 mm with one end configured for digital calipers and another designed to work with an assortment of tools, allowing you to customize its use.

This durable tool is constructed of high strength C185 steel with a Nickel Chrome Plating finish. It is designed to loosen and tighten components with inch pounds and mm measurements. This wrench is pinned at the tang end with the indicated nominal diameter allowing for accurate sizes readings when used in conjunction with a pin gage. The right angle tool allows for access in confined areas. This spanner wrench incorporates a unique locking mechanism which prevents the tool from opening up during use.