BELL & GOSSETT 264 SEAL KIT #7 REPLACES ARMSTRONG 8167

SEAL KIT #7 REPLACES ARMSTRONG 8167

#7 SEAL KIT replaces #8 ARMSTRONG 8167. Glazing tool, tape & installation instructions in bag. BELL & GOSSETT 264 SEAL KIT #7 REPLACES ARMSTRONG 8167 . FREE SHIPPING TO THE U.S AND CANADA. AZTEK ELECTRONICS IS YOUR GLASS SUBMITTAL CENTER.

BELL & GOSSETT 264 SEAL KIT #7 REPLACES ARMSTRONG 8167

The Bell & Gossett 264 Seal Kit #7 replaces 8167. It is for use in the following:

The kit is intended for use with the Armstrong type valves and comes complete with a brass insert valve and spout, a straight sealing plug, an elbow sealing plug and all required gaskets and O-rings. The 8167 seal kit is used in conjunction with either an Air Operated Ball Valve or Spring Operated Spillway valve.

A 3/4 inch suction with plug for a 68 inch Armstrong servo, bell & gossett 264. The rubber seal kit replaces OEM part number 8167.

Seal Kit #7 is for use on most 264 Bell & Gossett cast iron valves with a 1 1/2 inch NPS outlet. The kit includes the handle seal only and does not include handles or nuts.

Description Many older boilers were supplied by the late Armstrong's with a seal kit comprising gaskets, washers & pins to refill the boiler so that it could be re-certified for further use. Therefore when purchasing this seal kit you are purchasing exactly what was issued by Armstrong. This seal kit is rebuildable so that you can reuse same parts as many times as necessary to achieve the specified air tightness levels.