WHITE-RODGERS 285903 White-Rodgers Solenoid, SPNO, 14 VDC Isolated Coil

SOLENOID CONTINUOUS 4 TERMINAL SPNO

The White-Rodgers 285903 is a solenoid coil and comes fully submersible with 4 terminal SPNO. The 285903 is rated at 14VDC, 125mA continuous current.

This WHITE-RODGERS 285903 Solenoid, SPNO, 14 VDC Isolated Coil has a shaft that works with wiring having screw terminals. It features a gas spring-loaded plunger that is easy to turn ON and OFF. This 2 Terminal 14V OHM Gas Spring Plunger Solenoid has a current rating of 24 amps. The white finish helps conceal any dirt or grime. It operates with 120/230 volts and 14 VDC. The steel

This Solenoid in the SPNO is used for both gas and liquid actuated sprinkler timers and controls. It has a 500 Ohm coiled filament with a 240 Degrees sweep, all in a Brass casing. This unit is rated at 14 Volts for Gas or 12 Volts DC for Liquid applications and 350 Amps. This coil is sealed with neoprene seals, to keep out moisture and dirt.

The WHITE-RODGERS 285903 Solenoid, SPNO, 14 VDC Isolated Coil from White-Rodgers helps to control the water supply in area heaters, boilers, water heaters and other HVAC devices. 1/4in FPT inlet and 1/4in compression outlet connections ensure that this solenoid operates smoothly at up to 30 PSI while maintaining maximum efficiency. With a dependable metal up lever pointer trip mechanism and a long

These replacement White-Rodgers 285903 (SPNO) Solenoids are in-wall mountable and are compatible with incandescent and fluorescent lighting. An Isolated Coil allows for easy installation of both incandescent and fluorescent lighting by providing a common-ground connection to either fluorescent GFCI or 120/240V electrical systems. These solenoids are also tamper proof fitted with a dual status LED, locking nut, and white faceplate. Matching wallplates that are

WHITE-RODGERS Part # 285903 - Replaces part numbers 282909, WCR3151, 117317, 53856602, 3097395006 & many more This Genuine White-Rodgers Solenoid is an aftermarket replacement for several different White-Rodgers models. This solenoid has isolated coils which allows it to be used in water heater installations requiring an isolated coil. White-Rodgers part # 285903 also has 4

This large terminal solenoid offers continuous operation, with a maximum continuous duty current of 50A at 14V DC. It measures 4-1/10" W x 2" H x 5-5/8" D and comes equipped with four wire leads (6" total length) that are each rated for up to 15 amps. The coil shield is plated with copper to resist corrosion and the overall housing is rated for up to 250V AC RMS.