Honeywell RM7895C1020 , Inc. Ec7895,A,C Rm7895 On-Off Primary Control With Prepurge

120V PRIMARY CTRL W/10 SEC PRP

The Inc Group RM7895C1020 On-Off Primary Control with Prepurge is a 120V primary control used with electric operated furnace models using primary burners. It has a 10 second preheat delay and 10 second prepurge delay cycles. This control requires the 7795A secondary control. It also has an automatic flame monitor which initiates a 15 second off cycle if flame goes out. This control has a horizontal mounting configuration.

The RCH7500PR is a 208/230V primary controller, an on-off control with 10 second pre-purge timer. Its 20 amp x 4" circuit breaker can provide up to 80 amps at 240 VAC single phase input requiring 250ms of primary time for gas ignition. Replaces the Honeywell RCH7000PR.

The Honeywell Relay Module is designed to control large current AC loads. This relay module is a low voltage primary control that has been specially modified for use with high amperage AC loads and have a 10 second pre-purge time built-in. The device has an operating temperature of 0 degrees C to 40 degrees C and can be used as positive or negative temperature controller.

The RM7895C1020HA120 primary control uses a built-in 10-second purge to remove stale air before new refrigerant is introduced and a glow plug indicator light to let you know your unit is heating up. The unit can operate on 1, 2, or 3 circuits (up to 5 circuits with the addition of a power relay kit) and comes with the appropriate wiring for easy installation.

Our Honeywell Primary Controls feature an easy-to-use, electrical on-off primary control with purge for controlling an unlimited number of remote mounted secondary/local control valves. The Primary Control has pilot control functions of low and high, nighttime illumination, and pilot lockout.

The Honeywell Rm7895C1020, Inc. Ec7895A,C Rm7895 On-Off Primary Control with Prepurge is a low voltage switch used to control electrical devices or outlets from a single space and function with other devices. The Honeywell RM7895C1020 On Off Primary Control uses snap action for transition from on to off and off to on.

Designed to simplify the installation, retrofit or replacement of residential primary controls. Turn the power ON/OFF. Will NOT control power to any other device. DO NOT USE if installation or replacement requires resetting of circuit breaker(s). Wire connection instructions included on this listing.