CONBRACO 45393 Apollo Valve 12-200 Series Bronze Safety Relief Valve, ASME Steam, 15 psi Set Pressure, 2" NPT Male x Female 642415171359 .

STEAM PRESSURE RELIEF VALVE, 2" X 2

The ASME Steam Pressure Relief Valve has a set pressure of 1-15 psi and maximum operating temperature of 300F. It features the field repairable brass bonnet construction with bronze body and bonnet, 30% lighter than cast iron, needle valve type for positive shut off, non-rising stem with locking nut on the outlet/inlet side to prevent hand or soft face hammer damage.

The Apollo Valve from CONBRACO is a bronze body steam pressure relief valve. It is used in boiler installations to relieve excessive pressures and the stresses on the system created by their use. This valve is fully adjustable over the range of 0-200 PSI and 15 pounds per square inch (PSIG), with a maximum relieving capacity of 250 PSI.

CONBRACO Steam Pressure Relief Valves are designed for installation in boilers and pressure vessels. ASME-approved safety relief valves may be used in steam pressure vessels where the maximum allowable working pressure (MAWP) is fixed by codes requiring automatic actuation, or design pressure of the vessel and the PSV is selected for safety reasons only.

A steam pressure relief valve should be installed on all steam piping systems. Our Apollo Valve is designed to provide protection against excessive steam pressure and to limit the maximum allowable working pressure in applications where a constant pressure is required.

Our Bronze Safety Relief Valve is designed to provide protection from the effects of overpressure. This relief valve assembly is offered with 2-inch male BSPT and 1/2-inch female NPT connections. This Bronze Safety Relief Valve is suitable for virtually all steam applications as a safety relief device, whether it is used on its own or as a part of a safety relief system. The safety relief valve ensures that if pressure in the system exceeds a set pressure value, the excess pressure will be vented safely.

Our line of steam valves represents the latest technology in relief valve design. This new design incorporates the lastest developments in pressure relief valves and incorporates state-of-the-art NDE technology for a safe and reliable product...

This Safety Relief Valve is designed to protect steam lines from dangerous over pressurization. Also known as a "Super Safety" valve, they are for use in steam applications at pressures 100 p.s.i.g and higher. Apollo valves have large bonnets filled with shaft packing to prevent leakage under pressure.