14" DRAFT REGULATOR FOR OIL,GAS,WOO
A M-G & E 14" DRAFT REGULATOR FOR OIL, GAS, WOOD STOVE WITH MANUAL GRAVITY WINDLASS.
AFFORDABLE MULTI-PURPOSE DRAFT REGULATOR. This device is a direct replacement for hard to find 4" and 5" regulators on oil, gas and wood burning furnaces. 14" Draft Regulator is intended for use with oil, gas and wood burning furnaces
Add the 14" Draft Regulator to your oil/gas/wo purchase for properly pressurizing your oil or gas water heater. The regulator comes with a 1/2" NPT connection and with support for up to 25 PSI.
FREE SHIPPING SPECIAL ON THIS 14" DRAFT REGULATOR!
The Field Controls 14M+MG2 combines safety, dependability and value in a full featured control that is competitively priced. The simple three-way operation is great for contractor use. This regulator is perfect for oil, gas, and wood burning applications up to 2000 feet of altitude.
The MG2 is a versatile draft regulator. Built to work with natural or liquid propane, the MG2 will also open and close gas-fired dampers for hot water heat and boilers. The MG2 will also work as a safety pilot to control burner size and output on oil furnaces, boilers and woodstoves. It has a flame sense port for adding manual forced air circulation systems in homes without forced air.
The Field Controls™ 14M gas regulator with easy access manual fuel safeties is UL and ULC Listed. The regulator ranges from 8-14 mbar (0.75-1.75 in. WC) and is a drop-in replacement for the top of the line Honeywell/MRK gas control with amber dial. It has two manual safeties on the front face, with low pressure shutoff, high pressure shutoff, and pilot flame sensor that simultaneously monitor the system for over flow/shortage of gas and pilot flame failure.