Honeywell 1886 1 SPDT AUX SWITCH FOR MOD IV MOTORS 1 SPDT AUX SWITCH FOR MOD IV MOTORS

1 SPDT AUX SWITCH FOR MOD IV MOTORS

Honeywell 1886P 1 SPDT AUX SWITCH FOR MOD IV MOTORS. CIRCUIT BREAKER, AXIAL TYPE, 1 POLE, 1 WIRE, 2 TERMINAL, SPDT, 45A @ 125V AC MAX RATING. APPLICATION: FOR VARIOUS MOTORS

The 1886 is a 1 SPDT auxiliary switch designed for applications that use Mod IV motors. The switch has a 2-position handle (on/off) and features a white ABS plastic body with white plastic handle. Contact resistance is rated at 0.5mO across the line and line to load sides and 0.25mO between the line and load contacts for maximum contact durability.

This 1 SPDT auxiliary switch adds an optional ON/OFF control to your Mod IV Motor. Simply connect this switch into the motor's wiring harness and use it to turn your fan on and off, or to replace a malfunctioning switch.

The Honeywell 1886 is a 1 SPDT Auxiliary Switch for use with Mod IV 40 Amp motors. It has a primary voltage of 120 Volts and a secondary voltage of 24 Volts. The Honeywell 1886 is a normally open switch.

When used with a 2-wire motor, this auxiliary switch will allow you to add a neutral load to your system. Application Examples:

The 1886 is an extra toggle switch for select Honeywell VantagePoint control boards. This switch can be used as a manual override on some modulating gas valve models when the primary switch has lost all contact to the common link.

The SPST switch has one solid state relay output and two SPDT relay outputs. It is designed for use with the Airtight, Double-Lock Housings. The switch circuit is isolated from power which eliminates interference caused by electric fields that can occur with standard electromagnetic switches. These switches are constructed in a rugged stainless steel case for years of reliable service.