ROBERTSHAW 5502-236M 240V Infinite Switch

240V Infinite Switch

The switch will open the circuit in response to excessive vibration to prevent damage to equipment and/or injury to personnel

The Robertshaw R/S Vibraswitch 366-A2 power supply has been discontinued

The VIBRASWITCH 366 is a solid-state, voltage-sensitive relay designed for use on air conditioning and refrigeration compressors

The new replacement part number is 20076 6000-002

This switch is used to control the speed of blowers, pumps, and exhaust fans

Suitable for use with 12 or 24VDC systems

Please contact MetroPac customer service if you have any questions at 1-800-666-7678 or sales@metropac

The switch can be used in residential, commercial, or industrial settings

A ROBERTSHAW® VIBRASWITCH is a compact, rugged, time-delay relay that senses vibration within a range of 6

The VIBRASWITCH 366-A2 is a safety air switch designed to protect pneumatic control circuits from unacceptable vibration

The relay features an auto-reset function, controlled by the operating voltage

The ROBERTSHAW 20076 6000-002 "R/S 24VDC VIBRASWITCH 366-A2 - is a 24 volt, 200mA standard plug in wall transformer for use with the Vibraswitch 366-A2

The VIBRASWITCH is available in two models, one with a normally closed (NC) contact and one with a normally open (NO) contact

A VIBRASWITCH® heavy-duty, vibration-activated control provides a user-friendly solution for automatic status indication and switching between two set points

It is designed to switch on and off with moderate vibration and can be used in applications such as heating, ventilation and air conditioning systems

5 to 25 Hertz (Hz)

Robertshaw VIBRASWITCH® vibration monitoring switches are designed for use in highly corrosive and/or abrasive applications

Control vibrating motors or other devices with the vibration-sensitive switches

It is protected against overcurrent, overvoltage, overheat and most other problems that may occur throughout the operating cycle of the compressor

Includes end-of-travel limit switches

VIBRASWITCH 366-A2 is designed to control AC and DC vibrating motors, amplifiers, and other devices that require a continuous on/off action

It automatically indicates when the switch is in the on or off position without requiring operator action or supervision

The Vibraswitch 366-A2 Positioner/Valve is a self-contained audible position indicator for 2 and 3 way valves

The performance of this relay will be affected by motor starting current and the ambient temperature at which it is being used

The input signal causes the solenoid plunger to move, opening and closing the contacts

The switch can be mounted on a panel or it can be attached directly to the equipment using the provided hardware

These stainless steel switches have a black, epoxy-coated finish that provides maximum corrosion resistance in aggressive environments