Reznor 140615 - IGN CONV KIT JC TO UTC 100L LO REPLACES 97547.

IGN CONV KIT JC TO UTC 100L LO REPL

Reznor's IGN CONV KIT JC TO UTC 100L LO REPLACES 97547 allows you to convert your Ignition Control Module (JC) to a Universal Transistor Control Module (UTC). The kit is a plug-and-play with no wiring and includes the 25-956 backlit Remote Control.

The IGN CONV KIT JC TO UTC 100L LO REPLACES 97547 simulates the often-used igniter to the UTC-100L LO fast pyrolysis system. It is used in place of the factory igniter in applications requiring extended travel times. The igniter is a direct replacement for the factory igniter and allows you to verify your circuit prior to system commissioning, or it may be used as a backup in case the factory igniter fails during operation.

Reznor 140615 - IGN CONV KIT JC TO UTC 100L LO REPLACES 97547 - 2 SLIDES WITH NO PUMP.

The IGN CONV KIT JC to UTC 100L LO REPLACES is a replacement 1.5 Hp motor 4 frame slide-out combination kit by Reznor Manufacturing. It includes one frame or slide-out and 4" x 6" or 100 mm x 184 mm keyed shaft end gearbox with a 15 HP continuous rating, 30 HP overload rating, 1150 RPM, 56-1/2" shaft length, 1.5 hp, 208/230-460 volt standard, and includes a NEMA 6-15P plug. The keyed shaft allows the transfer of power from gearbox to machine

Reznor ® 140615 Ignition Conversion Kit JC to UTC 100L LO Replace

The IGN 115V CONVERSION KIT provides the installer with the components necessary to convert a standard IGN 115V switch to a UTC 100L Low Oil Level switch as required by UL Standard 1484 and UL Standard 1581. Mounted on the UTC100L Low Oil Level switch is a 5810 Neutral Grip kit in lieu of an integral GFCI.

Replace the fan control board in your JC 100-L, JC 200-L or JC 400-L ovens. When replacing more than one board make sure to order a complete set of control boards - one for each oven. Your shipping costs are included in this price. For warranty / return reasons: you must be sure and have all three (3) boards in your possession before returning the unit.