Reznor 137492 258251 DSI Controller Replacement Kit

DIRECT SPARK IGNITION BOARD REPLACE

Our DSI Controller Replacement Kit can be used to replace a Direct Spark Ignition board that has been damaged and will no longer work.

Plug and Play. Each kit contains 1 Direct Spark Ignition Board, 1 (One) 5K Ohm IRF640 Power MOSFET, & 1 (One) 120uF 25V Electrolytic Capacitor.

Our DSI Controller Replacement Kit is the ideal solution if you have a DSI Controller that needs replacement and can't be repaired. It comes complete with all the electronic parts needed to replace the board in your controller, including a new DSI Controller direct spark ignition board, a solenoid valve, capillary tube and thermo protective wire harness.

Once again, the best warranty in the ignition industry! Our R&D team is constantly on the trail of improving your product. Recently, we discovered a potential improvement that we think will boost performance in certain situations. We call it the DIRECT SPARKTM Ignition Module and it is an easy-to-install replacement unit designed to keep your smoker firing consistently and at peak performance.

Direct Spark Ignition (DSI) technology combines the capabilities of a spark generator and an ignition control module (ICM) in one compact, simple-to-install device. The electronics are designed to ensure optimum triggering and tuning of the gas valve(s). DSI technology is available for natural gas, propane, or LP applications. DSI kits consist of a PCB assembly, pluggable terminal strip replacement kit, wire harness replacement kit, metal enclosure and instructions for installation.

Reznor wiring harness kit with spark plug wire and ignition board. This is designed to replace the stock ignition wires on your Reznor or DCI controller with a high quality, quick-start circuit board. All boards are made by DSI using OEM sourced components for trouble-free operation and reliability. All kits come with an ignition board, distributor cap and rotor, and a wire to connect to the spark plug.

When you need to fix or rebuild a dual spark ignition system, it can be tricky and time-consuming to figure out what component failed. Save yourself the headache of figuring out which part failed by replacing all of the failing components with a complete DSI Controller Kit. Don't waste money on expensive individual parts that may not fix your problem. Instead, try a complete kit for an easy and affordable solution.