IGNITION TRANSFORMER FOR CARLIN 501
Allanson 36310 Transformers 2714-633 120/12000 CARLIN TRANSFORMER is an Ignition Transformer for use in Carlin 501. The primary of the transformer is made up of two windings - a 120V 1.25kVA winding and 120/12V 2.5kVA winding. The secondary is designed to reduce the voltage by 50% down to a maximum potential current (MPD) of 6 amps, which is suitable for the operation of Carlin 501 at 240/240V AC.
The Allan-son 36310 transformer is a 120/12000 transformer for carlin 501. It is a BOPF/SCR-type ignition transformer, with an MVA of 4.35 and rated HP=0.83.
# This 6 Volt, 120/12,000amp Transformer is an ignitor for the Carlin 501. # The wire that would hook up to a distributor ignitor and the bottom post would hook up to the actual ignition coil that was mounted right next to it.
The 2714-633 is a 120/12000 Amp, 600 Volt, 3 Phase, Heavy Duty, Line Reactor Transformer with Primary And Secondary Wye Connections. The 2714-633 has a Maximum Base Mounted and Exposed Live Rating of 100KVA and presents a Class "H" Insulation System. The 3714-633 is typically used as an ignition transformer for Carlin 501 heating Systems or other applications where high energy is needed and phase balancing is not required.
The Allan-son 2714-633 transformer is a new replacement for the 3018-701 UL certified power supply originally used in the Carlin transformers. Instead of using 4 molex connectors like the original power supply, this replacement uses 6 wire terminal connections and includes 12 gauge wire. When sold out use 18 gauge wire. The body of the transformer has been updated with a label holder that will hold the Carlin 501B, 501C or 503B model number label.
The Carlin® 501 transformer is a single phase 12kVA 120/240V must be grounded transformer used in standard voltage applications. The transformer is equipped with one wire three pin plug.
The Allan-Voltage™ 2714-633 120/12000 VA CARLIN transformer has an output voltage of 575 VAC and an output current of 120/12000 VA. The single phase high power distribution transformer is designed for 50/60 Hz applications.