ALLANSON 36268 Transformer Catalog 2721 TYPE 605 Primary Voltage 120 Ignition Transformers 2721/605/120 Beckett S.

IGNITION TRANSFORMER FOR BECKETT S,

This Ignition Transformer will convert the 24 volt system voltage to the 120 volts ac required to operate your Beckett Sales S. The transformer has a clearly marked primary voltage of 120.

The BECKETT S 36268 Ignition Transformer converts 120-Volt primary voltage to 6.32-Volt secondary voltage three current output to fire a twist lock igniter or electronic spark plug in an engine. The two 12 V DC output and 0.7-Amp output allow for instrumentation or switching applications. The plastic case, laminated paper insulation, and metal end caps offer high resistance to moisture and oil. ** WARNING ** Do not use this transformer if the ignition

This 120-volt transformer converts electricity from your home to the voltage needed by Beckett S and other vacuum cleaners into which it is to be connected. This ignition transformer is rated for 120 volts. Rule of thumb: The operating voltage (spelled out on the nameplate) must not be over the transformer rating, nor under the fuse wire or circuit breaker protection rating. Great caution must be taken when using this or any other type of transformer, because they can be very dangerous if misused. It

270 Volt, 1200 Watt, Single Phase power supply that can be used with Beckett S and similar units.

Features: • Ignition transformer for

The Beckett S is a 24V 2-Element interrupter controller. It has an advanced pre-programmed digital output which controls the mechanisms for opening and closing the switching contacts using 100% solid sapphire electrical switches. This helps to greatly improve synchronisation and repeatability. The electronic version of this product, called the “S”, has an enhanced digital output that provides better control to the system overall

This Ignition Transformer is used in place of the more commonly used capacitor discharge ignition transformer. It has the advantages of simplicity and directly firing a low inductance distereotrigger coil. It can be made to fit into relatively small space with a minimum amount of welding, and even may have a better trigger circuit and stability under heavy line loading conditions. Extremely low voltage drop, DC surge capacity greater than 500 amps, operating voltage to 10kv at 120 Vac.