Honeywell 11919 Push Rod, Dia 5/16 In, Depth 8 In

8" x 5/16" Pushrod

Pushrod - 5/16" O.D. x 8" Length, Carbon Steel, Boxed.

Honeywell's exclusive "locknut" technology gives you the same clamping strength as a threaded rod with the speed and convenience of push-to-fit. All Honeywell Pushrods are 5/16" in diameter (3/8" = 16 threads per inch) and 8 inches long. This specific product has a locknut design with a 5/16" outside diameter and an 0.630 inch inside diameter.

The honeywell 11919 is a 5/16" x 8" nylon push rod that is used as the primary valve actuator for urinal flush valves. It is designed for use with hh2, hh3, and hh4 urinals.

This push rod from Honeywell is used for applications such as garage door openers, overhead gate operators, and heavy duty industrial equipment. The typical operating angle of this push rod is between 0 and 90 degrees allowing it to be used in a variety of applications. The overall diameter of this push rod measures 5/16 inches and the length is 8 inches. This product is sold individually.

Pushrods are used to deliver motion from the pilot linkage to the main valve stems on your plumbing system.

The small pushrod is useful for mechanical and architectural applications where shafts must be moved smoothly with little effort. Made of chrome plated spring steel, it can be used as a pilot or follower to transmit rotary movements.

Pushrods are used to deliver linear motion from one location to another. Often these pushrods are rotating in the same direction as a shaft that is being rotated. A large variety of standard, special length, and customized pushrods are available for your application.