Hydrolevel 112608 HydroStat Universal Temperature Limit and Low Water Cut-Off for Oil-Fired Boilers, 120 VAC.

120V Hydrostat Universal Temperatur

The Hydrostat Universal is a solid-state self-regulating controller that maintains boiler water temperature for oil-fired heating equipment. It is especially effective on steam boilers operating at temperatures up to 280°F with a 23 PSIG connected pressure. The Hydrostat Universal combines a Limit Control and a Cut-Off Device into one compact package. When the temperature of the boiler water approaches the “LIMIT” point, the OPEN (no power) relay will energize, allowing electricity

Hydrolevel HYDROSTAT UNIVERSAL. Warning: California residents, Prop 65

The HydroLevel 112608 Hydrostat is a direct replacement for the factory-installed temperature limit device on oil-fired boilers. The Hydrolevel is engineered with a microprocessor-based electronic control which automatically reduces boiler output if the fan oxidizer becomes overheated. In this way, the unit acts as both a time limit and water cut-off device. It can also be set to monitor the soundness of air valves and flues, emptying the tank contents via its drain line if they

This Hydrostat is designed to automatically maintain temperatures of the water in a heating boiler between a minimum and maximum setting. This means that it can be installed without requiring a temperature controller. The system status is monitored by the unit through multiple sensing points, which are wired through standard wiring harnesses. When a change is detected, output coil relays are activated to close or open the start/stop and high limit safety valves. These features include an adjustable thermostat for maximum set point and minimum cut-

This HydroStat is intended for use with oil-fired, water-tube boilers. It is UL/CUL approved and has been field tested to meet the following boiler limit safety requirements: ASME Section VIII, Division 1, Va <29.0 lb/in2 (200 kPa), LWCO 25% (hot tap), 70°F (21°C). This Hydrostat is intended for use on hot water boilers where a temperature limit safety device may be installed

The Hydrostat™ 112608 is a self-contained diverter for low and high water cut-off. Since it's completely automatic, the Hydrostat requires no manual adjustments or skilled supervision to operate successfully. It is ideal for protecting residential as well as industrial equipment, including boilers, storage tanks, process piping, evaporation systems and much more. The Hydrostat is also perfect for use with forced-air portions of your heating system.

The HydroStat helps prevent oil or gas burners from being destroyed by the lack of water in hot water-heating systems. It automatically shuts off the burner if the flow of water stops, and it also prevents damage to the burner if a low pressure condition causes cold water to be drawn down the flue. A simple but important device for home and business builders.