TEKMAR 107784 - Zone Manager - tN4 Compatible - 6 Zone Valves

6 ZONE MANAGER CONTROL

TEKMAR's ZONE MANAGER is the ideal controller for any 6 zone application using a 2 wire thermostat. The ZONE MANAGER features a large LCD display and programming capabilities, including total run time roll-up, zone stat reporting, and specialty functions such as conflict notification.

The TEKMAR T1009 Zone Manager Control with 6 zone valves is designed for use with the new 12 Channel tN4 Thermo-Niche Network Thermostat. This allows you to monitor and control each zone independently. tN4 thermostat functions include: Cycle Timer, Scheduled Temperature Change, Auto Changeover, Local Display/Control, Backlight, and 12-24 VDC power options (Included).

This 107784 Zone Manager control is compatible with the following tekmar zone valves:  107591, 107583, 107788, 107787. It has 6 valves to control the zones.

This zone manager control is used with the TeKmar 107784 Eight Zone Valve which was designed to provide irrigation for greenhouses and nurseries. Our zone manager control system gives you a convenient and reliable way to operate your channels. The valves are 5/8" in size and consist of a factory assembled spool, stainless steel pivot pin, non-rising stem, polytetrafluoroethylene (PTFE) roller and rectangular flange.

The 107784 Zone Manager with tN4 controller is a 6 zone valve that can control up to 6 zones. A zone is a single temperature point in a home, typically a living room or bedroom, and by controlling multiple zones, energy can be saved by using different temperatures in different rooms. For example, heating your home to 21 degrees C when you aren't at home makes great sense, as it's much more efficient than heating the whole house to 25 °C for several hours each day. The Zone manager can be used with pump systems up to 15lpm (5gpm) and will interface with energy

The Zone Manager is a 6 zone valve that is compatible with all of the other valves in the Tekmar tN series. These valves are adjustable for temperature between 55°F and 93°F. They are used for zoning your house water supply. The Zone Manager features brass reinforced solder joints and NEMA 4X thermoplastics to make sure each of the 5 zones has plenty of hot water when needed. The temperature of the water can be adjusted up or down, but because of the proximity to the heating elements it may vary slightly from zone to zone. The 6 zone valve can be used with sprinkler systems or

Zone Manager Controller - Zone manager is an advanced valve system controller that simplifies and speeds up the process of handling zone valves. Based on TRMS (trouble report management system) technology, this programmable unit takes you through the trouble report management process and then stores all trouble reports in a database for later reference.