HEIL QUAKER / ICP 222338 SWITCH LMT 3" SB

SWITCH LMT 3" SB

The HEIL SWITCH LMT 3" SB replaces the condenser coil on a refrigerator that has been manufactured since 1996 to approximately 2004 and has been discontinued by the manufacturer. The switch is mounted on the back of the refrigerator and is used to engage the compressor.

The QUAKER/ICP 222338 SWITCH LMT features the industry standard SUS roller ball-bearing mounting system, a slim but strong design, and is capable of supporting the weight of a full ICP 222308 hopper.

The ICP 222338 switch features 22 amp, 21,250 watt contacts rated at 380 volts. It has a voltage rating of 250 volts to ground and is rated for 5 amps at 277/480 volts. On the switch body are two plastic inserts with screws. One insert is marked "PW, SW LMT, 3", 10 kAIC." The other insert is labeled "IBT <277/480V-5A FUS <240VAC-F RUN 600VDC." The Q part number on the switch body is ICP 222338 and the HEIL part number on the switch body is

Be prepared to make quick and easy connections that provide added convenience for you and your customers. The ICP 222338 series PS switch features a 16-foot lead wire that terminates with a male plug. The SWITCH LMT series is waterproof and suitable for use indoors or out, with or without wiremold. No special tools needed! It's a Tool Free snap-fit design.

The Switch LMT is a directly coupled lightweight linear motion actuator featuring high-performance, good round-trip characteristics and high stiffness. It is designed for use in industrial environments where the motion control accuracy has to be combined with zero backlash performance and durability. The linear motion actuator features best-in-class performance due to its high stiffness.

The Switch LMT System is a complete electrical safety system designed for lighting, heating, and air conditioning (HVAC) applications. It detects faults in wiring and switches that you cannot see as well as devices that are switched on but do not have power. Its Safe-T-Beam technology provides safety to workers engaged in hazardous jobsite electrical work by detecting accidental or intentional contact with energized conductors. The device also features a test/reset button, visual LED indication of circuit status (open or closed), and a lamp test warning light.

A single switch used to control any relay or contactor device in the ICP ranging from 0.1 amp (relay only) to 2.0 amps. This switch is intended for use with a wide range of magnetic devices including the WEHTC, WEDC, CIDC, and CIDCZ.