ROBERTSHAW 17772 013 35 Series 24V Hot Surface Ignition 120/240 Control, 7 Trial for Ignition

832-002 24V/120V HOT SURFACE IGNITI

We provide our customers with the highest quality products at a competitive price

The 35-605606-223 uses a 24V AC voltage and requires 60mA current at startup

The 35 Series 24V DIRECT SPARK IGN control by ROBERTSHAW has been designed for use with gas furnaces

It operates up to 3 stages and provides a variety of features that are very useful for residential applications

Control Supply is your source for control valves, controls, and related components

The 35-605606-223 is a direct spark ignition control that provides a true solid state 24 volt signal

It incorporates a flame failure detector, which provides an automatic or manual means of shutting off the supply air to the burner(s)

Adjustable pressure relief valve is factory set at 35 psi and may be adjusted up to 90 psi

It is designed to control the burner or heat exchanger by causing the gas valve to open in response to the signals it receives from any of a number of field devices

Model 35-605606-223, Robertshaw, 35 Series 24V Direct Spark Ignition Control, 7 Trial for Ignition

The circuit is easily configured for multiple installations by adjusting jumper J1 on the control board

Used on gas fired furnaces, boilers, water heaters, or space heating appliances with up to two (2) stages and two (2) thermostats; use only one stage per circuit

I work with a professional HVAC contractor to create a system that delivers air quality, comfort and energy savings in a building's heating and cooling system

I'm the Control Supply ROBERTSHAW 35-605606-223

The 35 Series gives you a solid bang for the buck

This device features an adjustable pneumatic pressure relief valve

This product is designed to control the firing of direct spark ignition gas burners

Plus, I offer an easy installation and setup

ROBERTSHAW 35-605606-223 35 Series 24V Direct Spark Ignition Control, 7 Trial for Ignition

Easy to install and operate, the 35 series ignitor is a spark module designed for direct spark ignition of gas burners

My multi-speed motor offers high speed performance and my power screwdriver delivers ultimate control over my settings

The ignitor ensures proper operation under varying conditions over the full range of cylinder pressures typically encountered in natural gas or propane appliance applications

This direct spark ignition control package is simple to install and set up, and it gives you the ability to adjust hot flame, spark output, and timing

Also used on electric furnaces, boilers and water heaters where continuous ignition is desired