ADJ SNAP DISC LIMIT CONTROL 135/175
The Adjustable dual snap disc limit control is a miniature, manually adjusted, differential type of heat/cool air-conditioning thermostat used in a one-or two-stage air conditioning and forced warm air heating system, designed to regulate temperature.
A snap disc limit control with a 2C differential. The ideal snap disc for vertical applications.#
The White-Rodgers 5112 has a snap action, thermal overload with a manual reset, and an adj snap disk limit control. The device functions as a thermal overload protection, and the category of the device is surface mount. It has terminals that accept wire sizes of 18 to 8 AWG. The product can switch on rise and its dimensions are 9/16"H x 7"L x 2"W.
A snap disc-limit control intended for limiting the rate of rise of a liquid or gas in a constant pressure furnace when the temperature is controlled indirectly by means of a pilot flame or electrically. This Snap disc Limit Control has 50% Reducing Valve capacity, and up to 60% Overload capacity. The snap disc is not intended to modify the operating characteristics of a steam-operated system -
The White-Rodgers 5112 is one of our 1440 Thermostats and has a 40F Differential. The white color is a #8 Paint Cap Body which is an 8 mil wall thickness for use on a variety of interior finish surfaces. The square bezel with the frosted face, clear lens, and black pointer help to give this thermostat a modern feel. It has one hold bar, right side, left side, off (open), snap disc limit control, L/C position to ignite space heater if necessary, and this thermostat is designed to used in radiant heat systems for forced air
The White-Rodgers 5112 is a Snap Disc Limit Control thermostat that switches heating or cooling equipment on at a set point and turns it off at a lower temperature, reducing compressor overrun. This thermostat is for use with gas furnaces, oil burners, steam boilers, and hot water heaters.
The White-Rodgers 5112 Thermostat is a snap disc limit control that switches on when a snap disc makes contact with two terminals. This helps prevent overheating and is ideal for use with radiant floor heating systems.