WHITE-RODGERS 98295 White Rodgers 1/2" Bimetal Disc Board Mount Limit Control, Opens At 240 Degrees F, Closes At 210 Degrees F

BOARD MOUNT LIMIT 1/2" BIMETAL DISC

WHITE-RODGERS 98295 WHITE-RODGERS 1/2" BIMETAL DISC BOARD MOUNT LIMIT CONTROL, OPENS AT 240 DEGREES F, CLOSES AT 210 DEGREES F The WHITE-RODGERS 1/2" Bimetal Disc Board Mount Limit Control is ideal for creating a safe, energy efficient environment while maintaining the settings that you choose. This heat limit control limits the temperature rise to +200/-100 Degrees F. This white rodgers temperature limit control is a board mount design and features an aluminum housing with built in manual reset.

WHITE-RODGERS 1/2" BIMETAL DISC BOARD MOUNT LIMIT CONTROL, OPENS AT 240 DEGREES F, CLOSES AT 210 DEGREES F. Operates on line voltage (120 VAC) and controls equipment that has a heat sensitive overload device that operates on line voltage (120 VAC). Used with non-inductive loads only for continuous duty applications. Use with limit controllers to protect motors and other devices from overheating due to constant use or excessive load conditions. Controls are easily mounted on the board itself or in an enclosure using the hole pattern provided.

The White-Rodgers® 98295 Limit Control, Board Mount, 1/2 In. Bimetal Disc is used as a limit control in hydronic heating systems with a power supply cord and plug. This 1/2 inch bimetal disc model is limited to 240° F.-210° F. temperature differential and is rated at 2 amps and 125 Vac. The 1/2 inch bimetal disc has a white zinc finish, the mounting screws are stainless steel and the silver contacts are cadmium plated.

The White-Rodgers 98295 limit control is designed specifically for use with radiant heaters. This control will open when the tank temperature reaches 240F, and will close when the tank temperature reaches 210F. The 98295 incorporates a bimetal disc that assures accuracy and long operating life.

The White-Rodgers 98295 is a disc board mount limit control. It opens at 240 degrees F, and closes at 210 degrees F, with a temperature differential of 40 degrees between the closed and open positions. It is a board-mount 1/2" bimetal disc.

The White-Rodgers 1/2" Bimetal Disc Board Mount Limit Control, Opens At 240 Degrees F, Closes At 210 Degrees F is a board mount limit control which is designed for use on hydronic heating systems. It maintains the building temperature within a set range by controlling the burner to reduce or increase heat output. This limit control can be used in radiant heating applications as well as in hydronic heating systems. It features a bimetal disc which opens at 240 degrees Fahrenheit and closes at 210 degrees Fahrenheit when the building's temperature reaches within the specified range.

The industry's most accurate, responsive, and dependable bimetal limit control. White-Rodgers 1/2 in Bimetal Disc Board Mount Limit Controls are used in a variety of applications to control the temperature of domestic hot water heaters or for air conditioning equipment.

White-Rodgers 98295 1/2" Bimetal Disc Board Mount Limit Control, Opens At 240 Degrees F, Closes At 210 Degrees F. The White-Rodgers brand is the industry standard and this product carries a lifetime warranty that protects against defects in materials and workmanship.

The WHITERODGERS 98295 WHITE-RODGERS 1/2" BIMETAL DISC BOARD MOUNT LIMIT CONTROL is an ideal heating limit control for board type heaters. The translucent red disc indicates pilot operation and the green disc indicates burner operation. The disc panel swings off to provide access to the adjustment screws. The WHITERODGERS 98295 WHITE-RODGERS 1/2" BIMETAL DISC BOARD MOUNT LIMIT CONTROL is designed for use on gas fired hot water or steam systems only.

Designed for use on baseboard and cove heating systems, the WHITE-RODGERS 98295 Limit Control is a safety device that opens at 240 degrees Fahrenheit and closes again at 210 degrees Fahrenheit. It has a 1/2" bimetal disc, open contact rating of 12 amps and a close contact rating of 10 amps.