WHITE-RODGERS 98298 White-Rodgers 1/2" Bimetal Disc Board Mount Limit Control, Opens At 150 Degrees F, Closes At 130 Degrees F

BOARD MOUNT LIMIT 1/2" BIMETAL DISC

This 1/2" bimetal disc limit control is Board Mount and Opens at 150 degrees F and Closes at 130 degrees F. The disc can hold on to 160 degrees of residual heat. It has a wire lug connection for use with 0.14 in. to 1/4 in. diameter conductor, spring return to the open position, and uses a 6-32 screw to attach the housing to the disc.

The 98298 Bimetal Disc Board Mount Limit control opens at 150°F and closes at 130°F. This accurate control with 1/2" shank is for use on gas fired boilers and furnaces. Simple, bolt-in installation makes this repair part easy to install. Also available with 1/2" and 3/4" shanks.

Get the most out of your furnace with the White-Rodgers 1/2" Bimetal Disc Board Mount Limit Control. This control has a board mount collar that is designed to fit through the drilled hole in the control mounting board. It is used to control hot surface ignition gas burners, natural gas or propane that are equipped with an integral flame failure device and limit controls. The bimetal disc will opens at a temperature of 150 degrees Fahrenheit and closes at 130 degrees Fahrenheit.

This White-Rodgers bimetal disc limit control with board mounting bracket operates at 150 degrees F and opens at 150 degrees F and closes at 130 degrees F. It has a nickel finish. It is used in a variety of applications including air conditioning systems in homes and buildings; hydronic heating systems including hot water, radiant or steam boilers, high temperature domestic water heaters and facility equipment such as refrigeration coils, cold storage or freezer units; process heating applications.

The WHITE-RODGERS 98298 is a Bimetal Limit Control that opens at 150 Degrees F and closes at 130 Degrees F for a fixed temperature. It is designed for board mount installation and has gauge terminals.

It is normal for a bimetal disc control to open at 150° F to protect against overheating. This limit control opens at 150° F and closes at 130° F. The disc is 1/2" in diameter, 2-3/4" long, 5/8" hole spacing, and made of copper.

White-Rodgers 98298 0/1-2 Stage Heat Only Board Mount Limit Control, with a ball valve inlet. This control opens at 150°F and closes at 130°F.