WHITE-RODGERS 100004 White Rodgers 1/2" Bimetal Disc Board Mount Limit Control, Opens At 250 Degrees F, Closes At 225 Degrees F.

BOARD MOUNT LIMIT CONTROL OPENS AT

WHITE-RODGERS 1/2 INCH BIMETAL DISC BOARD MOUNT LIMIT CONTROL WRL100004. This white-rodgers 1/2 inch bimetal disc board mount limit control opens at 250 degrees f, closes at 225 degrees f. It is ideal for residential and light commercial applications.

The WHITE-RODGERS 1/2" Bimetal Disc Board Mount Limit Control, opens at 250 degrees F, closes at 225 degrees F is ideal for residential applications. This control offers a variety of features that are designed to ensure reliable and accurate heating operation. For example, this control features bimetal disc construction and provides a manual reset function that makes it simple to restore the desired temperature after an over-temp condition has been corrected. This limit control has thermal protection and a reset button that can be accessed with a screwdriver from the front of the unit. A white finish ensures this limit control will look good in any home.

WHITE-RODGERS 100004 WHITE-RODGERS 1/2" BIMETAL DISC BOARD MOUNT LIMIT CONTROL, OPENS AT 250 DEGREES F, CLOSES AT 225 DEGREES F 1/2 INCH DISC, 24V DC FAULT CONTACT OPENING AT 250 DEGREES F CLOSING AT 225 DEGREES F.

This White-Rodgers Disc Limit Control is a typical limit control used in hydronic heating systems. This is a direct replacement for 1/2" 200,000 BTU per hour bimetal limit controls. This limit control opens at 250 degrees F and closes at 225 degrees F. It can control up to 100,000 BTU per hour and can be used for either hot or cold systems.

Limit controls are used to shut off the supply of heat or air conditioning to a zone when the temperature in that zone reaches a preset level. Limit controls should be mounted in an accessible location and they should be protected from freezing temperatures. They are available in both bimetal and thermistor types. This limit control is of the bimetal type, and will open at 250F (121C) and close at 225F (107C). The operating pressure range for this device is 0-100 psi. It has a 1/2" NPT connection, as well as a #4-20 mounting screw for attaching to the enclosure.

The WHITE-RODGERS 100004 White-Rodgers 1/2" Bimetal Disc

The White Rodgers 100004 Limit Control is used to limit the temperature on a forced air heating system. It will open at 250 degrees and closed at 225 degrees.

The WHITE-RODGERS 100004 is a board mount limit control that opens at 250 degrees Fahrenheit and closes at 225 degrees Fahrenheit. This WHITE-RODGERS board mount limit control has a maximum rise setting of 6 degrees and a maximum fall setting of 4 degrees. The minimum closing time is 3 seconds, the maximum closing time is 10 seconds, and the minimum opening time is 1 second.

BOARD MOUNT LIMIT CONTROL OPENS AT 250 DEGREES F, CLOSES AT 225 DEGREES F.