WHITE-RODGERS 78526 1/2" Bimetal Disc Board Mount Limit Control, Opens At 180 Degrees F, Closes At 160 Degrees F

BOARD MOUNT LIMIT CONTROL OPENS AT

WHITE-RODGERS 78526 1/2" Bimetal Disc Board Mount Limit Control, Opens At 180 Degrees F, Closes At 160 Degrees F - The board mount limit control opens at 180 degrees Fahrenheit (82.

WHITE-RODGERS 78526 1/2" Bimetal Disc Board Mount Limit Control is designed for use with baseboard heaters. This device will protect the heater from overheating and shut off the unit if the temperature rises to unsafe levels. The limit control also includes a safety feature that will not allow the unit to be turned back on until it has cooled sufficiently.

This control will open at 180° and close at 160°. Limit controls are normally used to control water heaters, baseboard heaters and fireplace dampers. If the temperature limit is lower than the room temperature, the heating system cycles continuously. If the temperature is above the set point, the heating system cycles off until the room cools down or until a manual reset occurs.

The WHITE-RODGERS 78526 1/2" Bimetal Disc Board Mount Limit Control, Opens At 180 Degrees F, Closes At 160 Degrees F is designed to provide an economical means of controlling air flow and temperature within a duct system. This limit control is used in residential and light commercial heating systems.

1/2" Bimetal Disc Board Mount Limit Control, Opens At 180 Degrees F, Closes At 160 Degrees F White-Rodgers 78526 is suitable for commercial or residential applications. This product is designed to open at 180 degrees fahrenheit and close at 160 degrees fahrenheit. It’s 1/2" bimetal disc board mount limit control is mounted on a square body with a 3/4” diameter x 1” long stem.

The 78526 1/2" bimetal disc board mount limit control, opens at 180 degrees F and closes at 160 degrees F. It is designed for board-mounted limit controls where the ambient temperature exceeds 150 degrees F (66 degrees C). The control is designed with a minimum immersion depth of 3/4" (19mm) for maximum heat dissipation and mounting flange measurement of 1-15/16" W x 2-3/8" H (47mm x 60mm).

WHITE-RODGERS 78526 1/2" Bimetal Disc Board Mount Limit Control, Opens At 180 Degrees F, Closes At 160 Degrees F

WHITE-RODGERS 78526 – 1/2” Bimetal Disc Board Mount Limit Control, Opens At 180 Degrees F, Closes At 160 Degrees F

The WHITE-RODGERS 78526 is a board mount limit control that opens at 180 degrees F and closes at 160 degrees F.

The WHITE-RODGERS 78526 1/2" Bimetal Disc Board Mount Limit Control, Opens At 180 Degrees F, Closes At 160 Degrees F is a product for those who need a limit control for any application where safety is a concern. This particular limit control has an opening temperature of 180 degrees and a closing temperature of 160 degrees. The unit is made from white zinc plated steel and backed by the trusted brand name of WHITE-RODGERS.