1/8" HOT WATER FLOAT VENT 150 PSI 5
TACO 400-4 is the hot water float vent replacement aquarium tube with all polished 304 stainless steel construction for long lasting durability.The TACO 400-4 1/8" HOT WATER FLOAT VENT 150 PSI 5 Aquarium Tube is suitable for a wide range of uses including water treatment, manufacturing, environmental control , heating, process piping and research fluid circulation.
The TACO 400-4 400-4 1/8" HOT WATER FLOAT VENT 150 PSI 5
400-4 1/8" HOT WATER FLOAT VENT 150 PSI 5
The Taco 400-4 1/8" Hot Water Float Vent 150 PSI 5 is made of high quality copper tubing with stainless steel end caps. This unit has aluminum mounting flanges that are standard equipment for easy installation. This Taco hot water float vent system is tested to ANSI Z21.41 safety standards, and is used to provide fresh air circulation in a steam supply system. This Taco hot water float vent system comes with an attached float rod to create the automatic steam trap action. Be sure to buy your Taco 400-4 1/8" Hot Water Float Vent 150 PSI 5 from American Plumber today
Aeromatic's 400-4 400-4 1/8 hot water float vent features 1/8" automatic suction relief. This high quality replacement float valve is designed to insure years of dependable service. Also, the fully adjustable pressure switch features an electromagnetic actuator with pressure ranges from 0 to 150 PSI 5 . Other major specifications include a durable nylon case, 0 to 150 PSI 5 range, flanged discharge, 150 PSI 5 maximum discharge pressure, 5/8-18 UNF thread size.
DESIGNED FOR INDOOR AND OUTDOOR USE::The Taco 400-4 1/8" hot water float vent has a thermal expansion relief valve, a stainless steel housing for corrosion protection, and a nickel-plated disc to allow for precise sealing. It is designed to work with both the Taco 400-4 and Taco 600-6 high pressure steamers.
The Taco 400-4 hot water float valve is designed to be mounted on a 150 psi or higher hot water system while utilizing a 1/8" NPT connection. Taco float valves are designed for commercial uses and are NSF certified to NSF / ANSI Standard 61 for equipment and appurtenance sanitation.
The Taco 400-4 1/8" Float Valve is ideal for radiant heating systems that are pressurized to 150 psi. The water is pressurized through this valve using an air compressor. It will not open until the air pressure has been met.
The Float Vent is a light-weight type float valve, with a plastic body and inlet, a brass drain inlet in the bottom of the body and a brass outlet in the top. Designed for use with water piping systems between 120 to 150 psi.
Attach this vent to your float and you can set the water temp and pressure by your air pressure.Adjustment screws allow fine tuning to allow the vent to work with just about any pump.
Pipe size: 1/8"
Auxiliary Water Heater