HONEYWELL 40003918-0 40003918-0 POWERHEAD CONVERSION KIT (WATER) 3-

POWERHEAD CONVERSION KIT (WATER) 3-

The POWERHEAD CONVERSION KIT (WATER) 3- converts the POWERHEAD VACUUM 3 to a fully functioning wet/dry vacuum. It comes with all of the necessary components and can be installed in less than one hour.

Powerhead Conversion Kit Conversion Kit (Water) 3-Pack

The Powerhead conversion kit (water) 3 includes the following components:

Do you already have a powerhead that works with your system but it no longer fits? The Conversion Kit makes it easy to update and convert your powerhead to work with systems containing 3-outlets. This is an add-on item and requires at least one of the following: CM152, CMS15, CM2000, CP1527, CP2500 or CP3500 powerhead

The Honeywell Powerhead conversion Kit for water is designed to convert a gasoline powered unit (down flow) to a totally electric unit (up flow). This conversion kit can be used to install an electric pump on a new or existing gas or diesel powered unit. With the Water immersion and the air lift this pump has superior performance. Honeywerks recommends this pump if you have a larger home or that you may be going through large amounts of water each day, such as a vacation home. With the power of water each family member will be able to shower with ease.

This powerhead conversion kit is used on Bryant and Payne furnace models 90BL80 and 90BK80. This powerhead conversion kit comes with a control box, transformer, 400 lb. galvanized steel wire rope with brass snap hook, brass swivel pulley assembly, stainless steel flue tube clamp, stainless steel screws for water tube install and wire harness connectors.

The RMR7A4-WN converts power heads for use with water. It can be used in a low pressure system or in combination of both systems. The kit includes: an electrical solenoid that is triggered by the power head manifold, an anti-airlock back-up valve, and the appropriate check valve.