RHEEM 43-25136-1 Capacitor - 35/370 Single Round Capacitor - 35/370 Single

Capacitor - 35/370 Single Round

The RHEEM 43-25136-1 Capacitor - 35/370 Single Round is a product made by RHEEM.

Capacitor - 35/370 Single Round

The RHEEM 43-25136-1 Capacitor is designed for use with heat pump systems. This capacitor is rated at 35/370 amps at 180 degrees F. This capacitor has a single round mount and is connected to the run winding of the stator.

The capacitor can handle the starting power demands of up to a 5 ton air conditioning unit. This capacitor has bridge rectifiers which can handle this fluctuating power demand. The belled capacitor terminals on this capacitor are non-adjustable regardless of if it is for 230V or 240V, it is always 3 wire. These capacitors are assumed to be polarized, meaning that if you hook it up backwards the capacitor still functions but inverts your voltage to protect the equipment that uses it from shock & fire hazard.

Rheem capacitors, like all parts that carry the Rheem name, are manufactured with pride and precision. The components are subjected to the most rigorous quality control standards in the industry. Capacitor is a Genuine Original Equipment Manufacturer part and is designed to fit your Rheem product.

The RHEEM Capacitor will be attached to the outdoor fan motor. This is a BRAND NEW Capacitor that is designed to replace the existing one on your outdoor unit. The outdoor fan motor will help circulate air through your unit. This capacitor will help to provide cooling and heating to your home. The outside fan motor will make a buzzing noise when it is working properly. However, if it makes a screeching, grinding or similar noise then this would indicate that you have an issue with the capacitor and you should replace it as soon as possible before damage occurs to the unit.

RHEEM Capacitors are commonly used in a variety of applications, and come in different voltages, ampacities (capacitance), and winding styles. They are categorized as either single or double wound. Single wound capacitors have one winding encased inside the plastic housing, while double wound capacitors have two windings consisting of an inner primary winding and an outer secondary winding encased within the case.