SINGLE STAGE HOT SURFACE INTEGRATED
White-Rodgers single stage hot surface ignition, Integral to line power systems only. For installation in non-metallic enclosures only. Primary Features: SINGLE STAGE HOT SURFACE IGNITION Multiprocess Gas Valve is recommended for applications requiring a manual gas shutoff valve. Designed with an integral ignition module, this gas valve can be wired with the direct spark ignition method. The single stage ignition provides a greater probability of successful ignition at lower temperatures, resulting in increased system availability.
The IPC280363 is a Single Stage Hot Surface Int egrated with a Heat Trip Circuitry. The unit includes an overload device, contactor and terminal strip. It features a modular design, wide voltage input range, solid state operation, operating frequency of 50/60 Hz and A-B contact system with spring loaded auxiliary switch. The 280363 is UL Listed, CSA Certified and NOM Certified
Single Stage Hot Surface Thermostat with Integral Cutout and Pilot Assembly Screwdriver adjustable
The 280.363 is a 1-stage hot surface interface module designed for use with the 82 Series (except 82-1 and 82-5). It provides a trigger output and a common trip terminal.
The Institutional Furnace 140/Ind District Hot Surface Igniter is a single-stage solid state unit designed for replacement of a solid-state or flame failure safety mechanism on community heating and air conditioning systems. This ignition is designed to be used with the White-Rodgers 280363 (WRI140-C). The 280363 component has provision for an external resistor, internal high current sensor and/or external impedance.
A single stage heating element is the most basic and oldest design for indoor electric baseboard heaters. This style of heating element was widely used in the early years of electric baseboard heat, and is still heavily used today in commercial applications and in countries outside of the United States. Some companies are still manufacturing them today, including WHITE-RODGERS. Find accessories for this item or check out related items below.
The 280 Series gas valve has a single stage design, meaning that it is capable of providing two-stage operation. This makes it an ideal choice for applications where both modulating and pilot ignition are desired.