CALEFFI 114851 Differential Bypass W/graduated sca

Differential Bypass W/graduated sca

The Caleffi 114851 Differential Bypass W/graduated sca is a single source factory supplier that is one of the leading names in the pump and control industry. For more than 70 years, Caleffi has been providing custom-designed solutions for all of your process control needs. We offer a wide range of irrigation pumps with displacement ratings ranging from 1.5GPM to 180GPM and voltage ratings from 110V AC to 460VAC.

The Caleffi 114851 Differential Bypass W/graduated sca is black with red and gray handles, and has a weight capacity of 250 lbs. The bypass differential has a 5:1 reduction ratio, 0.002” linearity compliance, and is accurate to 0.0001” at 2 inches per second travel speed, 0.0005” at 10 inches per second travel speed, and 0.0001” at 1 inch per second travel speed.

The Caleffi 114851 Differential Bypass W/graduated scale provides a solution to shifting gears during movement. Add this differential bypass to your low lift gates, and enjoy the smoothness of perfect operation. This differential bypass is contained within an all-metal shell, for longlasting reliability, thickness: 2 mm, sca : 3/8 " x 1", all metal.

The Differential Bypass with Graduated Sca is designed to install in the hydrostatic transmission of small diesel-powered equipment and pumping units. This bypass can be used in place of the regular fluid flow restriction to prevent damage to engine components if hydraulics are lost at high speeds due to differential rotation. The main body of the bypass has a back-pressure restrictor inlet fitting, as well as an adjustable output valve with a 1-1/8 NPT female outlet fitting.

The Caleffi 114851 differential bypass w/graduated scale is a replacement part for the Caleffi model type STC65A-1B transmission cooler. This differential bypass is unique in the fact that it has no restrictor or orifice tube for adding trans fluid to the external bypass line, allowing the flow rate of transmission fluid to be increased up to several times what would be possible with a normal orifice tube. The graduations on this bypass are oriented so that when the fluid level decreases with use, the cross-sectional area of the outlet lumen is larger than the restrictor or

The 114851 differential bypass with graduated scale is a convenient tool to use for many technician services. This is especially true in modern vehicles, where more precise calculations can be made due to the wide range of available parameters obtained from the electronic control board.

Separate hot and cold water with the CalAqua 114851 bypass adapter. A differential bypass permits you to use two distinct water qualities in one main line. This 114851 bypass adapter has built-in graduated scales on the faceplate, so you can monitor when a filter needs to be changed. The 114851 maintains flow between 0.5 gpm (1.9 lpm) at 0 psi (0 bar), 30 psi (207 kPa) at 10 gpm (37 lpm) and 45 psi (310 kPa) at 25 gpm (102 lpm).