WHITE-RODGERS 107858 White Rodgers/RBM Solenoid Coil 586117111

36VDC SPNO ISOLATED SOLENOID COIL,

The White-Rodgers/RBM 586M Series Solenoid Coil is specifically designed as part of the White-Rodgers RMI series and RBM series of wireless zones to provide a manual make-before-break switching capability. A low voltage coil that operates on a normally closed (NC) or normally open (NO) contact, it has two operating configurations: Normally Closed and Normally Open. The 586MI Series SpnO Isolated Solenoid Coil features a NEMA 4 enclosure configuration with a 1.3" Dia x 1.5" deep stainless steel body. The operating coil current is

White-Rodgers 107858 is a 'SPNO' type of Solenoid Coil. It has an Amp rating of 0.050 with One Normally Closed and One Normally Open contacts. Connections are made via 4 AWG wire leads. The coil voltage requirements are 110/120 Volts AC. The coil power consumption is 0.510 Watts. The coil maximum operating time is 1 mili second at the maximum temperature of 150°F (65°C). The coil minimum startup time is 1 mili second at the minimum temperature of -40°F (-40°C). And finally, the Coil resistance

White-Rodgers/RBM 58611-7111 is 36VDC, 7.5 amp DC coil with a SPNO (separate neutral) terminal and internal power supply. Two terminal connections are available for use as needed.

The White-Rodgers 107858 is a 36vdc isolated solenoid valve control coil. This component's application is for circuit protection, specifically electrical overload protection. The White-Rodgers/RBM solenoid coil 107858 has a configuration of 10 leads with male pins . Their current carrying capacity is 2A at 24vdc.

The WHITE-RODGERS 586117111 is a Solenoid Coil and part of the series 107858. The WHITE-RODGERS 586117111 is their 586117111. The WHITE-RODGERS 586117111 is a 36VDC A F. It has a voltage protection rating of IP67/NEMA 4X, and temperature protection of -40 degrees Fahrenheit to 260 degrees Fahrenheit (-40 degree Celsius to 1280 degree Celsius).

Simply stated, this compact coil is a self-contained, high-speed, fully controlled solenoid that seals out hazardous leakage from 24VDC to 36VDC systems by blocking or bypassing the system's source of supply. It consists of a dual sealed 3/32 in. thick glass envelope containing all components and field wires, a ferrous core for holding the armature in any position between 0° and 180° of rotation, and the air gap in both the primary and secondary coils are shielded to assure complete magnetic isolation of the two coils at all times.

The White-Rodgers/RBM Solenoid Coil family of products features a multitude of styles, technologies, and functions that are in compliance with National Electrical Manufacturers Association (NEMA). Featuring the latest technologies like Flash-Over Protection or FOP, this series of solenoid coils helps protect the most sensitive electrical and pneumatic equipment in commercial and industrial environments.